Manual Hendi 223307 (page 7 of 56) (English, German, Dutch, French, Italian, Polish)

741838

Zoom out

Zoom in

1/56

4. PREPARING FOR INSTALLATION

Remove the outer packaging (wooden caging and/

or carton box) and dispose it in compliance with the

laws in force in the country of installation.

REMOVING PROTECTIVE FILM ETC.

All packaging must be fully removed, including the

protective ﬁlm applied on the external and internal

walls.

Remove all information covering from the inside,

and take off all plastic packaging.

STAND ADJUSTMENT

Do not use the appliance without feet.

The adjustable feet are already screwed to the un-

derside of the oven.

If they are not used, this prevents airﬂow from

cooling the electric parts and outsides of the oven

which causes over-heating and damage to compo-

nents.

The oven will function correctly if placed level on

a ﬂat surface by adjusting the feets accordingly and

using a spirit level. Screw or unscrew them as nec-

essary to adjust.

FITTING THE DRIP TRAY DRAIN

Fit the plastic clip and the white water pipe that is

inside the packaging. Check that the pipe is ﬁrmly

connected so that water can ﬂow from the tray to

the drain (see image).

5. ELECTRICAL CONNECTION

WARNING: Main connections must be carried

out by a qualified and authorized technician ac-

cording to national, international and local laws

in the country where it is installed. Before mains

connection, ensure that the frequency (...V) and

voltage (...Hz) meet the requirements indicated

in the in the information tag on the back of the

appliance.

The electric system, as prescribed and speciﬁed

by the Standard in force, must be equipped with

an efﬁcient ground. It is possible to guarantee the

electric safety of the appliance only in the presence

of Standard electric system.

For direct connection to the mains, it is necessary

to interpose a device between the equipment and

the same mains, sized for the load, that ensure its

disconnection. The contacts must have an opening

distance enabling the full disconnection, in condi-

tions of over-voltage category III, per compliance

with installation regulations.

This device also must be located in a place and in

a manner to be easily accessible at any moment by

the operator.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 223307 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 223307 Manual

Product: