741838

Hendi 223307 Manual

6
Zoom out
Zoom in
Previous page
1/56
Next page
6
EN
1.2 WARRANTY
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
1.3 DISCARDING & ENVIRONMENT
At the end of the life of the appliance, please dispose
of the appliance according to the regulations and
guidelines applicable at the time.
Throw packing materials like plastic and boxes in the
appropriate containers.
2. PRELIMINARY OPERATIONS
Once unpacked, ensure the oven is intact and does
not show signs of damage due to transport. A dam-
aged appliance must never be installed and com-
missioned; if in doubt, immediately contact the af-
ter-sales technical assistance or your own dealer.
In the case of damage or missing parts inform the
carrier and retailer/manufacturer immediately, in-
dicating the code (Art.) and serial number (Ser N°)
and attach a photo.
Check that the installation area is kept clear so that
doors, corridors and passageways are accessible.
3. INSTALLATION AREA
The appliance shall be installed in enclosed and well
ventilated areas (not outdoors).
The ambient temperature of the place of installa-
tion of the oven must be higher than +4°C.
Before positioning the appliance, check the overall
dimensions and the exact position of the electri-
cal, water and fumes exhaust connections, fumes
exhaust.
It is advised to place the oven under an extractor
hood or in such a way that hot fumes and odours
exit the oven via adequate ventilation to the outside.
The oven must be placed on a flat surface so that it
does not slip or turn over.
The installation area must be able to support the
weight of the appliance filled to the maximum.
See the information level on the back of the oven
for the gross weight.
Make sure that it is placed so that the door may be
fully opened.
Position it so that the back of the oven is easily ac-
cessible for maintenance, connection to the mains
sockets, and water.
The appliance is not meant to be fitted and a 5 cm
space must be left all round it.
Do not position other heat sources like, fryers or
hotplates, near the oven. If this is not possible at
least respect the following distances from machin-
ery: 50 cm from the sides and above the appliance
and 70 cm from behind.
Do not place the device near materials or contain-
ers of inflammable liquids (such as walls, furniture,
screens, gas canisters) as it can be a fire hazard. If
this is not possible, cover the inflammable parts
with fire and heatproof material and by checking
fire hazard regulations.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 223307 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 223307 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info