741172
7
Zoom out
Zoom in
Previous page
1/92
Next page
7
EN
Blending part (7) and blade (8):
CAUTION! Please wear protective gloves for disassembly (not included).
8
Coupling
Shaft
Disassembly:
1. Hold the coupling of the blending part (7) and
screw out the blade (8) by anti-clockwise until it
is fully detached.
2. Hold the blending part (7) and pull out the shaft.
Assembly:
1. Insert the shaft into the blending part (7) until it
is fully inserted.
2. Hold the coupling of the blending part (7) and
screw in the blade by clockwise until it is fully
tightened.
Suitable for: Blending juices and shakes
Mixing soft ingredients (e.g. pancake batter or mayonnaise).
Mixing vegetables into soup (e,g. carrots, etc.)
Preparation: Peel or pare food and cut them into small chunks.
Place the food into a suitable container of capacity 1~4 litres.
Maximum continuous op-
eration time
3 minutes to prevent motor overheated. Operate the appliance again after
cool down.
Once connected to the power plug, “3” will be
shown on the LCD display (4).
Lower the blending part (7) into the food contain-
er (not supplied). Fully submerge blade (8) into
the ingredients before starting the appliance.
ATTENTION: You should not submerge the blend-
ing part (7) above the Max. mark.
Hold the main unit (10) firmly with one hand and
the mixing container with the other hand.
Press and hold the ON / OFF button (1), the appli-
ance then starts blending continuously.
Use a gentle up-and-down motion to blend the
food ingredients smoothly.
To avoid food spattering, do not lift the appliance
out of the ingredients during operation.
Select the blade speed by pressing the + (2) or
- (3) button (Speed range: 1 to 6) during opera-
tion. The blade speed will be shown on the LCD
display (4).
Note: No need to press the ON/OFF button (1) when
selecting the blade speed simultaneously.
After finish operation, release the ON / OFF but-
ton (1) to switch off the appliance.
Wait until the blade (8) stop completely. Then, un-
plug it from the electrical supply.
Turn the main unit (10) clockwise to disassembly
the blending part (7) for cleaning.
Note:
1. Press and hold the decreasing and increasing
button + (2) or - (3) button for fast adjustment.
2. The default blade speed will be set to “3” once
plug in.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 222157 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 222157 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info