Manual Hendi 210802 (page 5 of 60) (English, German, Dutch, French, Italian, Polish)

741106

Zoom out

Zoom in

1/60

1. MAIN TECHNICAL PARAMETERS

MODEL VOLTAGE

SUPPLIER

POWER RPM

(LENGTH, MM)

(WIDTH, MM)

(HEIGHT, MM)

210802 230V/50Hz 550W 170 432 261 484

210819 230V/50Hz 750W 170 427 261 486

Short-term operation: 10 minutes operation.

2. INTRODUCTION

• We advise you to carefully read the instruction con-

tained in this package.

• If you wish to make the best use of the meat minc-

er and exploit all its possibilities, you must be

thoroughly familiar with its performance and op-

erating features.

• The meat mincer may only be used for mincing

fresh meat.

• Maintenance requires just a few simple operations

that may be carried out by the operator.

• To ensure a long life and minimize operating costs,

you should carefully follow the rules given in this

booklet.

• The manufacturer has designed the meat mincer

to ensure safe operating conditions:

Exclusion or removal of the safety features in-

stalled by the manufacturer will seriously under-

mine the guaranteed safety conditions.

• To ensure these conditions you must also fully

comply with the instructions regarding the instal-

lation and power supply of the meat mincer.

• The meat mincer must be installed in a work envi-

ronment free of corrosive agents.

• The installation site must not be subject to explo-

sion.

• The manufacturer company is not liable for any

breakdown, accidents or faults caused by a failure

to observe ( or to apply ) the instructions contained

in this booklet. It is likewise not liable for any mod-

iﬁcations, variations or the installation of accesso-

ries not previously authorized.

• Use only original SPARE PARTS.

• This instruction booklet is an integral part of the

meat mincer and must be kept in a safe place. The

features, information and drawings published in

this booklet are the exclusive property of the man-

ufacturer company.

• No part of this publication may be reproduced or

transmitted in any form.

ATTENTION! Do not continuously operate the ap-

pliance for too long to avoid overheating the mo-

tor. The continuous operation time must not ex-

ceed 10 minutes. Let the appliance cool down if the

appliance housing becomes too hot. Only operate

the appliance again, after it has cooled.

IMPORTANT: Before connecting your units to the

power supply, be sure the machine’s electrical

specifications, printed in the unit’s nameplate,

match those of your local power.

• For ﬁrst-time use, remove the mincer head and

wash all parts thoroughly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 210802 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 210802 Manual

Product: