741297

Hendi 207369 Manual

8
Zoom out
Zoom in
Previous page
1/80
Next page
8
EN
Calibration function
This function allows the user to calibrate and ad-
just the “display temperature” align with the “ac-
tual temperature”. A calibrated thermometer with
probe is required (not included) for measurement.
• During operation, press and hold both the IN-
CREASE and DECREASE buttons for 5 ~ 6 sec-
onds to enter “calibration mode”.
• Then, the “display temperature” shown on the
display will blink constantly.
• Next, put the thermometer (not included) inside
the oil tank for comparison. Be careful as the oil
is hot.
• When under steady situation, press INCREASE or
DECREASE button to align the “display temper-
ature” with the reading in the thermometer (not
included).
• After that, press TEMPERATURE icon to confirm
it after finishing calibration.
RESET the Hi-limiter (thermal cut-out)
Please note that the RESET button is located at
the bottom of the detachable back support with a
protective cap (See line drawing to avoid overheat.)
• Unplug the deep fryer from the electrical outlet
first.
• Allow the deep fryer to completely cool down.
• Remove the detachable back support from the
support.
• Unscrew the black protective cap of the RESET
button.
• Press the RESET button of the Hi-limiter (ther-
mal cut-out). You should hear a click sound.
• Screw back the protective cap on the RESET but-
ton.
• Reinstall the detachable back support on the
support.
Deep frying tips
• Only use liquid frying oil (preferably) or fat.
• The recommended temperature for frying chips
and snacks is 175°C max.
• Heat the oil slowly. Preferably in 3 steps for ex-
ample first at 100°C, then from 100-140°C and
later from 140°C to 175°C with 15 minute breaks
between steps.
• Remove ice and crumbs from frozen foods.
• Do not deep-fry too much at one time. This can
cause the oil or fat to cool down too much. Cooled
down oil/fat does not properly sear the surface of
the food, so that more fat will be absorbed. The
ideal proportion of frozen products to frying oil/
fat is 1:10 maximum.
• When used intensively, crumbs and other debris
should be filtered out of the oil/fat.
• Replace oil or fat in time. Use test strips or test
equipment regularly to track when oil/fat should
be replaced.
• If oil or fat starts to foam, smoke or gets too vis-
cous you should replace it. Also replace the oil/fat
when it has a strong smell or taste.
After use
• Turn off the appliance by pressing the ON/OFF
icon and removing the plug from the socket.
• Remove the basket from the oil container. This
avoids the basket becoming stuck in the solidi-
fied fat.
• Put the lid on the deep fryer, so that the fat does
not age.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 207369 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 207369 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info