Manual Hendi 205914 (page 6 of 104) (English, German, Dutch, French, Italian, Polish)

741388

Zoom out

Zoom in

1/104

Installation

• Place the appliance on a level, stable, clean,

heat-resistant and dry surface with its rubber

feet.

• Carefully install the back support with heating

element (4) on the rear edge of the oil container.

• Place the bottom grid (9) at the bottom of the oil

container (5).

• Set up the frying grid holder (8) on either right or

left side of the oil container (5).

Note:

1. Make sure that the rear support is in the cor-

rect position & properly inserted into 2 slots at 2

sides of the oil container (5).

2. The appliance should be placed in a safe position

in your kitchen before use due to heat hazard

when in use.

Main parts of the appliance

1. Main switch (Green) [ON (I) / OFF (0)]

2. Temperature indicator (Orange)

3. Temperature control

4. Detachable rear support with heating element

5. Oil container (400x400x(H)160 mm)

6. Oil drain tap

7. Frying grid (2x 354x383x(H)102 mm)

8. Frying grid holder (1x 423x446x(H)40 mm)

9. Bottom grid (1x 390x365x(H)40 mm)

Use

• Make sure the oil drain tap is closed.

• Remove the plug from the socket.

• Make sure the oil container is clean and dry and

no water inside.

• Carefully ﬁll the oil container with oil between the

“MIN” and the “MAX” marking.

• Plug the earthed plug into an earthed socket.

• You can now use the appliance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 205914 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 205914 Manual

Product: