Manual Hendi 201442 (page 7 of 88) (English, German, Dutch, French, Italian, Polish)

741179

Zoom out

Zoom in

1/88

Adding and draining vacuum pump oil

Add oil to the pump if the following situations occur.

Important! Make sure the pump oil is above MIN

marking and check regularly.

1. Before ﬁrst use, the pump needs to be ﬁlled with

oil (Supplied).

2. When the oil level is below the MIN marking.

3. When the performance of the machine deteri-

orates.

4. Drain out and re-ﬁll the pump with oil every six

months.

A) Adding oil procedures

• Use the screw driver (supplied) to loosen the

screws (8) of the rear cover (6), remove the cover

to expose the pump.

• Twist off the screw cap anti-clockwise using a

tool (not included).

• Add pump oil using the oil bottle (supplied) until

the oil level is above the MIN marking.

• Tighten the screw cap clockwise using a tool (not

included).

• Reinstalling the glass cover (6) by ﬁxing the

screws (8) using a screw driver (supplied).

B) Draining procedures

• Take a collection container and place it beneath

the oil draining port which is covered by the hex

cap screw.

• Loosen the hex cap screw anti-clockwise by us-

ing the wrench (supplied).

• After all the oil is drained, screw the cap back on

clockwise and tighten it.

• Reinstalling the lower glass cover (6) by ﬁxing the

screws using a screw driver (supplied).

Important

1. Please dispose of the drained pump oil according

to the environmental regulations.

2. After re-ﬁlling pump oil, please place the ma-

chine in a horizontal position. Do not tip the

machine over.

Preparations before use

• Remove all protective packaging and wrapping.

Check to make sure the appliance is undamaged

and the completeness of the accessories. In case

of incomplete delivery and damages. Do not use

the machine and contact supplier (See ==> War-

ranty).

• Clean the appliance before use (See ==> Cleaning

and Maintenance).

• Make sure the appliance is completely dry.

• Place the appliance on a horizontal, stable and

heat resistant surface that is safe from water

splashes.

• Ensure that there is sufﬁcient ventilation. Keep

a minimum distance of 10 cm around the appli-

ance.

Note: Add pump oil (supplied) between the MAX

and MIN level for the ﬁrst use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 201442 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 201442 Manual

Product: