741177

Hendi 201428 Manual

9
Zoom out
Zoom in
Previous page
1/88
Next page
9
EN
Cleaning and Maintenance
Attention: Always unplug the machine from the electrical power outlet and let it cool down completely
before cleaning & storage.
Cleaning
• Never immerse the machine in water or other
liquids.
• Clean the cooled exterior surface with a slightly
damp cloth or sponge with some mild soap solu-
tion.
• Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
Pump oil
• Check the colour of the pump oil regularly
through the display (7). The oil should be clear,
bright and above the MIN level.
• If the pump oil becomes muddy and darken, it
means that the oil contains impurities and need
to be replaced.
• Change the pump oil for at least every 6 months.
Storage
• Before storage, always make sure the machine
is disconnected from the electrical outlet and
cooled down completely.
• Store the machine in a cool, clean and dry place
and make sure the lid is closed and secured with
the clamp.
Troubleshooting
If the machine does not function properly, please check the below table for the solution. If you are still un-
able to solve the problem, please contact the supplier/service provider.
Problems Possible cause Possible solution
The machine does not switch on.
Power plug is not connected properly with
the electrical power outlet.
Make sure the power plug is connected
properly with the electrical power outlet.
The ON/OFF button (A) is not pressed. Press ON/OFF button (A) to start the ma
-
chine if it cannot start automatically.
The vacuum bag is not vacuum and / or
sealed completely.
Vacuum/ Seal time is not long enough. Set longer Vacuum/Seal time.
The opening of the vacuum bag was not en
-
tirely and properly placed under the sealing
bar (11).
Pack the food in a new bag and place prop
-
erly in the chamber so the entire opening
can be sealed. Don’t use bags that don’t fit
the sealing bar.
The sealing bar (11) and the inside vacuum
chamber (9) is not clean enough.
Wipe the surface of the sealing bar (11)
and inside the vacuum chamber (9) to keep
clean, dry and free of debris.
There is some moisture, food particles or
debris on the seal area of the vacuum bag.
Wipe the seal area of the vacuum bag to
make sure it is dry and clean.
Vacuum bag loses vacuum after being
sealed.
Inside the vacuum bag has food with sharp
points to penetrate the bag and thus air en
-
ters into the vacuum bag.
Cut off the sharp points or cover it before
packing.
Some food can release gases also food can
release gases due to food spoilage.
Blanch or frozen the food properly before
packaging. Discard the food if in doubt.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 201428 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 201428 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info