741177

Hendi 201428 Manual

6
Zoom out
Zoom in
Previous page
1/88
Next page
6
EN
A. ON/OFF button
Press this button to switch the machine on or off.
B. START button
The machine has an automatic start function
which activates when the lid is closed. If this is
not set use the START button (1).
C. SEAL button
Press the SEAL button to stop the vacuum pro-
cess and start the sealing process.
D. SET button
With the lid (1) open, press the “SET” button to
set the time of the 3 processes (VACUUM TIME,
SEAL TIME and MARINATE).
E. Time adjust button ( Increase / Decrease)
Press these buttons to adjust the time for each
process (VACUUM TIME, SEAL TIME and MARI-
NATE).
F. Digital display
1) It shows the remaining time of the 3 processes
(VACUUM TIME, SEAL TIME and MARINATE).
2) When the vacuum and sealing process is fin-
ished and the lid (1) is still closed. “CLO” will
be displayed.
G. Light indicator (VACUUM TIME / SEAL TIME /
MARINATE)
1) With the lid (1) open, the indicator will light up
blue, press the or to adjust the time of
the corresponding process.
2) During each of the process, the corresponding
light indicator is ON to show which part of the
process is active.
H. Vacuum gauge
It shows the pressure level inside the vacuum
chamber.
Accessories
a. Wrench (1x)
b. Screw driver (1x)
c. Empty bottle with nozzle (1x)
d. A bottle of pump oil (Volume: 230ml) (1x)
Note: Vacuum bag is not included.
Adding and draining vacuum pump oil
Add oil to the pump if the following situations occur.
Important! Make sure the pump oil is above OIL
LEVEL marking and check regularly.
1. Before first use, the pump needs to be filled with
oil (Supplied).
2. When the oil level is below the OIL LEVEL mark-
ing.
3. When the performance of the machine deteri-
orates.
4. Drain out and re-fill the pump with oil every six
months.
A) Adding oil procedures
• Use the screw driver (supplied) to loosen the
screws (8) of the rear cover (6), remove the cover
to expose the pump.
• Twist off the screw cap anti-clockwise using a
tool (not included).
• Add pump oil using the oil bottle (supplied) until
the oil level is above the OIL LEVEL marking.
• Tighten the screw cap clockwise using a tool (not
included).
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 201428 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 201428 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info