702108

Hema 80.01.0099 Manual

22
Zoom out
Zoom in
Previous page
1/39
Next page
- 21 -
If problems occur?
Brown streaks come through the
holes in the soleplate and stain
the linen.
You are using chemical descaling
agents.
Do not add any descaling agents to
the water.
Fabric fibers have accumulated
in the holes of the soleplate and
are burning.
Let the iron cool down and clean the
soleplate with a sponge. Vacuum the
holes of the soleplate from time to
time.
Your linen has not been rinsed
sufficiently or you have ironed a
new garment before washing it.
Make sure that your laundry is rinsed
sufficiently so as to remove any
deposits of soap or chemical
products on new clothes.
The soleplate is dirty or brown
and can stain the linen.
You are ironing with a too high
temperature.
Let the iron cool down and clean the
soleplate with a sponge. Select the
appropriate temperature.
The soleplate is scratched.
You have placed your iron flat on
a metal rest-plate or ironed over
a zip.
Always set your iron on its heel in an
upright position.
Do not iron over zips.
Water drips from the holes in the
soleplate.
The chosen temperature is too
low and does not allow for the
formation of steam.
Position the thermostat to the
maximum temperature setting.
You are using steam while the
iron is not hot enough.
Wait until the control light goes out.
You have stored the iron
horizontal, without emptying it
and without switching off the
steam function.
Empty the iron after each use, and
store it vertical.
Environment
In compliance with the directives on Waste Electrical and Electronic Equipment, this product must not be
discarded with domestic waste but should be disposed of separately for recycling. If you wish to dispose of this
product in the future, do NOT throw it away with the household rubbish but hand it in at a specially designated
place, such as your municipal domestic chemical waste depot.
Quality
Safety and quality is very important to HEMA. We have our own laboratory, which assesses all equipment in
terms of electrical safety and ease of use, before it is included in our range. HEMA also monitors the product
quality in collaboration with the manufacturer.
Security
This HEMA item may be fitted with a plastic anti-theft strip. You will find the strip on the bottom of the product.
This strip does not influence the quality or the operation of the product and can be removed without a problem.
Faults and repairs
If this device needs to be repaired, you can hand it in at a HEMA branch after packing the product securely. Do
not try to repair this product yourself. For repairs that fall within the warranty period, you will need to show a
proof of purchase and the warranty document. Regularly check the power cord for damage. If there is any
damage to the cord set, please return the item to a HEMA branch for repair. Do not try to replace it yourself.
For safety reasons we recommend that you do not carry out any repairs to an electrical device yourself.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hema 80.01.0099 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hema 80.01.0099 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info