702108

Hema 80.01.0099 Manual

20
Zoom out
Zoom in
Previous page
1/39
Next page
- 19 -
PARTS IDENTIFICATION
1. Temperature regulator
2. Burst of steam button
3. Spray button
4. Spray nozzle
5. Water inlet cover
6. Indicator light
7. Steam control knob
8. Soleplate
9. Water tank
10. Self-clean button
BEFORE INITIAL USAGE
Remove all packaging material. Make sure the appliance is unplugged and the temperature regulator is set at
position “OFF”.
Open the water inlet cover and fill water into the opening up to the max level marked on the water tank. For
this, use the measuring cup. Do not use chemically de-calcified water.
Insert the power plug into a designated outlet and set the temperature regulator on the highest temperature
setting. After the indicator light goes off, set the steam control knob to your desired position and iron on an old
piece of cloth to remove possible residue.
With first use, there can be slight odour or smoke, but this is harmless and only of short duration. Make sure
there is adequate ventilation.
OPERATION
Before selecting the temperature, read the instruction manual for the iron or the care advice on the tag of the
clothing.
Note: If there is no care advice on the piece of clothing, then you should begin ironing with the lowest
temperature. With lower temperature, there will be less steam.
OFF
Off
●
Nylon
●●
Wool, silk
●●● MAX
Linen, cotton, highest temperature
DRY IRONING
Connect the iron to a suitable mains supply outlet.
Ensure that the steam control knob is in position “ ”.
Select the setting on the temperature regulator.
When the indicator light goes off, the required temperature is reached. The iron is ready for use.
To turn off the iron, turn the temperature regulator counter-clockwise to position “OFF”, set the iron upright,
and pull out the power plug.
STEAM IRON
Fill the water tank, as described before initial usage.
Steam ironing can be used in the temperature ranges ●, ●●, ●●● MAX. For the reliable functioning of the steam
ironing, the water tank must be at least ¼ filled.
Spraying function: Press the spray button to moisten a spot to be ironed. Water will come out of the spray nozzle.
Steam Function: Turn the steam control knob to the required position, after preheating the steam iron first,
steam starts coming out from the holes in the soleplate.
Burst of steam: Turn the temperature regulator to the position “MAX”. The indicator light will go off when the
required temperature is reached. Then press the burst of steam button. This function provides an extra amount
of steam to remove stubborn wrinkles. For optimal use, please allow the appliance to have a rest of 3 - 5 seconds
between each press.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hema 80.01.0099 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hema 80.01.0099 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info