535968

Heco ASCADA 300 BTX Manual

10
Zoom out
Zoom in
Previous page
1/32
Next page
10
SYSTEM INSTALLATION (FIG. 2)
Connecting the power supply:
Included in delivery are a universal, external mains adapter (B) (110 - 240 V / AC 50/60 Hz) and the most commonly used
mains cable. The mains cable used in your country, however, may be different. If the mains cable is not compatible with
your power sockets or if you are in any doubt, please contact your Magnat dealer.
1. Connect the output cable (jack connector) of the small external mains adapter to the power supply jack of the
loudspeaker (2).
2. Insert the mains cable into the jack on the mains adapter.
3. Insert the mains cable into the socket. Make sure that you are using the mains plug that is compatible with the socket
(refer to the information above).
Connecting an audio source to the audio input AUX IN:
Use the supplied audio cable (D) and connect the audio output of the audio source to the audio input AUX IN (3).
Connecting a mobile device (mobile phone, MP3 player, etc.) to the USB charging socket USB CHARGE (4):
Devices that have a USB charging function can be connected to this socket and charged (Charging voltage: 5V, max.
charging current: 2.1A).
Please also refer to the instruction manual supplied with the corresponding device!
Connecting the device to a Bluetooth audio source:
Use the remote control to switch the ASCADA 300 BTX to the Bluetooth mode (Fig. 3, (10)). If you have previously
connected a Bluetooth device, the ASCADA 300 BTX will automatically attempt to re-establish a connection with this
device. If this is the case, you may be required to manually reconrm the connection on the source device.
If a preious connection has not been established or the connection cannot be restored, the blue LED (Fig. 1, (1)) will ash
slowly. To switch the ASCADA 300 BTX to the pairing mode manually, press the PAIRING button (Fig. 3, (11)) on the
remote control. The blue LED status indicator will ash quickly whenever the pairing mode is active.
Now activate the Bluetooth mode on your source device. The ASCADA 300 BTX will appear in the list of Bluetooth
devices as „300 BTX“. If it is not displayed in the list, set your source device to search for Bluetooth devices manually and
make sure that the ASCADA 300 BTX has been switched to the pairing mode.
Depending on the source device, you may be asked whether the password is to be accepted during the pairing procedure.
You can conrm this by simply pressing „Accept“. If you are still asked for a password, use the default passwords „0000“
or „1234“. If you are asked if you want to establish a connection after pairing, please select „Yes“. When the device has
been paired and connected successfully the blue LED status indicator will illuminate continuously.
The ASCADA 300 BTX supports the „aptx®“ high quality audio transmission standard. If your source device also supports
this standard, „aptx®“ will be selected automatically as the transfer mode when establishing a Bluetooth connection.
OPERATION
Speaker controls (front) (Fig. 1):
(1) Sensor for remote control and LED status display: Please aim at this sensor when using the remote control. The
operating status is indicated by the colour of the LED:
• green: analogue input active
• blue: Bluetooth input active, connected to the source device
• blue, ashing quickly: Bluetooth input active, device in pairing mode
• ashing slowly: Mute mode is active (device muted) or there is no Bluetooth connection.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heco ASCADA 300 BTX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heco ASCADA 300 BTX in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info