Manual Hayward SuperPump VSTD (page 23 of 192) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

801903

Zoom out

Zoom in

1/192

USE ONLY HAYWARD® GENUINE REPLACEMENT PARTS

22 Pump

3. OPERATING THE PUMP

3.1 Power on

'Power' lights up and an LCD test runs on screen,

then the software version is displayed on screen r162688888

. . . . . . . .

3.2 Priming phase

After switching on the pump, the priming phase starts automatically (this is the same after restarting the pump).

Priming phase begins automatically:

• The speed will climb to 3000 rpm and will last 240

seconds (default settings)

Pr 3000

End of priming phase:

• The pump will stabilize at V2 by default or at the

last recorded speed.

• The corresponding LED lights up (Manual mode)

2400

To display the remaining time of the priming phase:

• Press DISP/FUNC

• The remaining time is displayed in seconds

219

To stop the priming phase before it finishes:

• Press RUN/STOP

• The speed will stabilize by default at V2 or at the

last recorded speed

2400

3.3 In Manual mode: selecting, setting and saving a custom speed

To select a speed:

• Press one of the speed preset buttons

• The default value will be displayed (in rpm)

• The corresponding LED will light up

1500

To set a new speed:

• Press the up / down buttons

• The LED will blink: setting speed

• Choose the speed you want (between 600 and

3000 rpm)

1640

To save the new speed:

• Press and hold the speed preset button for 3 s

• The LED will show a constant light once the speed

has been saved

>3s 1640

Note: The water flow generated by the pump speed must be adapted to the volume capacity of the installed parts (filter,

pipes...). If you are unsure call a professional.

3.4 Stopping / restarting the pump

To stop the pump:

• Press RUN/STOP

• The pump will stop and the speed preset LED will

remain illuminated

• In Manual mode the screen will display 'StoP'

In Timer mode the screen will flash 'StoP'

StoP

To restart the pump:

• Press RUN/STOP

• The pump will begin its priming phase (section 3.2)

• Speed stabilization:

in Manual mode this will be the last recorded speed

in Timer mode this will be the operating speed of

the Timer preset

1640

t2400

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hayward SuperPump VSTD in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 27.15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hayward SuperPump VSTD Manual

Product: