801934
322
Zoom out
Zoom in
Previous page
1/418
Next page
42
6. APPENDICI (segue)
Malfunzionamento Codice
errore Descrizione Soluzione
Guasto sensore di portata E03 Circuito aperto o cortocircuito
Controllare i collegamenti AI/DI02 della
scheda o sostituire il sensore
Manca acqua, controllare che la pompa
di filtrazione funzioni correttamente
Controllare che le valvole di arresto
siano aperte
Controllare la regolazione della valvola
by-pass
Difetto temperatura uscita acqua E05
Applicabile unicamente con modalità
Freddo, temperatura in uscita acqua <
a 4°C
Fermare la pompa di calore, limite di
esercizio raggiunto.
Differenza di temperatura Ingresso/
Uscita > 13°C E06 Applicabile solo in modalità Freddo
Manca acqua, controllare che la pompa
di filtrazione funzioni correttamente
Controllare che le valvole di arresto
siano aperte
Controllare la regolazione della valvola
by-pass
Protezione antigelo Modalità
raffreddamento E07 Temperatura acqua in uscita < a 4°C
Verificare il colllegamento Rosso AIN7
sulla scheda e misurare la resistenza
della sonda: se è inferiore a 100 Ω o
superiore a 500 kΩ, sostituitela.
Fermare la pompa di calore, vuotare il
condensatore: forte rischio di gelo.
Guasto nel circuito di comunicazione E08 Assenza di comunicazione tra la scheda
elettronica e l’interfaccia utente
Verificare i collegamenti e la
connessione – vedi schema elettrico
Protezione antigelo livello 1 E19 2°< Temperatura acqua <4° e
Temperatura aria <0°
Interrompere il funzionamento
della pompa di calore, spurgare il
condensatore antigelo, la pompa
di calore avvia automaticamente la
pompa di filtrazione per evitare il gelo
Protezione antigelo livello 2 E29 Temperatura acqua < a 2° e Temperatura
aria < 0°
Interrompere il funzionamento
della pompa di calore, spurgare il
condensatore antigelo, la pompa
di calore avvia automaticamente la
pompa di filtrazione e la pompa di
calore per evitare il gelo.
Anomalie motore ventilatore F031 Motore bloccato o difetto di collegamento
Verificare la corretta rotazione;
verificare la connessione CN97/DCFan;
sostituire il motore
La pompa di calore non si avvia F08 Inversione o mancanza di fase possibile
Invertire due fasi sulla morsettiera
R-S-T.
Verificare il raccordo e il serraggio
delle fasi.
Temperatura esterna troppo bassa TP Temperatura esterna troppo bassa < a H34
(difetto -15°C)
Verificare il colllegamento AIN9 sulla
scheda e misurare la resistenza
della sonda: se è inferiore a 100 Ω o
superiore a 500 kΩ, sostituitela.
Verificare il valore del parametro H34
Guasto sensore di pressione PP Circuito aperto o cortocircuito Controllare i collegamenti (v. schema
elettrico)
322


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward SumHeat Fi Heat Pump - R32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward SumHeat Fi Heat Pump - R32 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 28.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info