801934
321
Zoom out
Zoom in
Previous page
1/418
Next page
41
6. APPENDICI (segue)
Malfunzionamento Codice
errore Descrizione Soluzione
Guasto sonda temperatura acqua in
ingresso P01
Circuito aperto o cortocircuito
Verificare il collegamento Blu AIN6
sulla scheda e misurare la resistenza
della sonda: se è inferiore a 100 Ω o
superiore a 500 kΩ, sostituitela.
Guasto sonda acqua in uscita P02
Verificare il collegamento Rosso AIN7
sulla scheda e misurare la resistenza
della sonda: se è inferiore a 100 Ω o
superiore a 500 kΩ, sostituitela.
Guasto sonda temperatura esterna P04
Verificare il collegamento AIN9 sulla
scheda e misurare la resistenza
della sonda: se è inferiore a 100 Ω o
superiore a 500 kΩ, sostituitela.
Guasto sonda antigelo P05
Verificare il collegamento Giallo AIN8
sulla scheda e misurare la resistenza
della sonda: se è inferiore a 100 Ω o
superiore a 500 kΩ, sostituitela.
Guasto sonda di aspirazione
compressore P07
Verificare il collegamento Verde AIN5
sulla scheda e misurare la resistenza
della sonda: se è inferiore a 100 Ω o
superiore a 500 kΩ, sostituitela.
Difetto Resistenza 6.8 kΩ P09
Verificare il collegamento AIN11 sulla
scheda e misurare la resistenza,
sostituirla se R < a 6.8
Guasto sonda di mandata
Compressore P081
Verificare il collegamento Nero AIN12
sulla scheda e misurare la resistenza
della sonda: se è inferiore a 100 Ω o
superiore a 500 kΩ, sostituitela.
Temperatura di mandata troppo alta P082 Temperatura di mandata > a 120°C
Misurare la temperatura di mandata in
uscita dal compressore: se T misurata <
a 120°C sostituire la sonda.
Effettuare un test del gas incondensabile.
Protezione alta pressione E01 Circuito aperto o cortocircuito
Verificare la connessione CN30/HP
sulla scheda e il connettore prolunga
oppure sostituire il sensore
Controllare la portata d’acqua
Controllare il sensore della portata
d’acqua
Controllare l’apertura delle valvole
Controllare la valvola by-pass
Controllare il livello di sporco
dell’evaporatore
Temperatura acqua troppo calda
Problema incondensabile in seguito
a manutenzione, svuotare e porre
sottovuoto il circuito frigorifero
Carico fluido eccessivo, espellere il
fluido in una bombola
Protezione bassa pressione E02 Circuito aperto o cortocircuito
Controllare i collegamenti AI/DI03 della
scheda o sostituire il sensore
Perdita rilevante di fluido frigorigeno,
cercare la perdita con il rilevatore
Portata aria troppo bassa, controllare la
velocità di rotazione della ventola
Controllare il livello di sporco
dell’evaporatore e pulirne la superficie
321


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward SumHeat Fi Heat Pump - R32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward SumHeat Fi Heat Pump - R32 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 28.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info