Manual Hayward SharkVAC XL Pilot (page 25 of 163) (English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian)

801912

Zoom out

Zoom in

1/163

Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.

Use of non genuine Hayward manufactured parts will void all warranty.

Page 6 of 18 SharkVAC XL™ Pilot Robotic cleaner Rev. C

7. After the pool has been cleaned, switch OFF the power supply before removing the cleaner from the

pool.

8. Remove the cleaner from the water at the shallow end of the pool by pulling the cable until the cleaner

reaches the surface. Then lift it out of the water using the handle, NOT the cable.

9. If the supply cord is damaged it must be replaced by the manufacturer, service agent, or similarly

qualied persons in order to avoid a hazard.

10. All electrical connections must be done by a qualied electrician according to local electrical standard

(see p17).

Caution: When pulling the cable, reel it in hand-over-hand - do NOT reel it around your arm.

DO NOT ENTER THE SWIMMING POOL WHEN THE CLEANER IS OPERATING.

Optimum operating water temperature range for the cleaner is 10ºC - 35ºC.

Remove the cleaner from the pool after each use. Keeping the cleaner permanently in the pool may

result in additional service requirements.

POWER SUPPLY OPERATING INSTRUCTIONS

When the power supply is initially switched ON the BOTTOM ONLY CYCLE will

be automatically selected. This is indicated by the light on the cycle selection

switch. The cleaner will automatically shut-off after 2 hours of operation on this

cycle.

To select the full clean cycle depress the FULL CYCLE button at any time during

the cleaning operation. If the BOTTOM ONLY CYCLE has completed simply turn

the power off and back on, then depress the FULL CYCLE button. The light on

the cycle selection switch will indicate that the full cycle has been selected. The

cleaner will automatically shut-off after 4-hours of operation on this cycle.

Nota: to exit the Bottom & Wall Mode and go to Bottom Only Mode, turn the

Power Supply Off and On. The bottom only cycle will be automatically selected.

This is indicated by the light on the cycle selection switch.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hayward SharkVAC XL Pilot in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 11.28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hayward SharkVAC XL Pilot Manual

Product: