801912

Hayward SharkVAC XL Pilot Manual

24
Zoom out
Zoom in
Previous page
1/163
Next page
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
Page 5 of 18 SharkVAC XL™ Pilot Robotic cleaner Rev. C
GENERAL OPERATING INSTRUCTION
Take a moment to get familiar with the cleaner using the gure 3. Throughout this manual reference to
this gure is made when referring to different components of the cleaner.
Remove the cleaner by placing the carton down and removing
it from the box as shown. The cleaner and the Power Supply is
premounted to the cart. See the gure 4 for Caddy Cart.
1. Select the nearest 230 V
outlet that is close and protected from short-circuits. Fit a 30 mA differential
protection device to protect people from electric shock caused by a possible break in the electrical
insulation.
2. Place the power supply so that it is at a minimum distance of 3.5 meters from the pool edge. The
length of the standard cable is 16,76 meters.
3. Connect the oating cable to the power supply. Use only the original Power Supply manufactured by
Hayward.
4. Place the cleaner in the pool. It will slowly sink to the bottom of the pool as the air inside is released.
5. Connect the power supply to the protected outlet and switch it on. The cleaner will perform a self-
diagnostics routine for several minutes before starting the cleaning cycle.
⚠ Caution: DO NOT switch power supply "ON" when the cleaner is out of water. This may result in
damage to the pump and drive motor seals, which will VOID the warranty.
6. The cleaner will automatically shut off after 90 minutes for the quick clean cycle or 4 hours for a full
cleaning cycle. If your pool is cleaned in less time than 90 minutes, you may shut the cleaner off
manually by switching the power supply to the off position.
Should a second cleaning cycle be required, switch OFF the power supply for 10 seconds and
restart. (see Power Supply operating instructions)
Fig. 1
3.5 m
Fig. 2
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward SharkVAC XL Pilot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward SharkVAC XL Pilot in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 11.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info