801917

Hayward AquaVac 650 Manual

17
Zoom out
Zoom in
Previous page
1/98
Next page
CAUTION - RISK OF EQUIPMENT DAMAGE
The cleaner is not intended to clean the pool after extended
periods of disuse until the following steps have been taken:
1. Clear the pool of any large objects that might interfere
with the cleaner’s operation.
2. Check to see that the water is at the recommended level.
3. Check the water chemistry. The water should be
properly balanced (pH level), and the pool free from
algae. Algae can adversely affect the operation and
performance of the cleaner.
4. Clean or backwash the ltration system without the
cleaner in the pool.
NEW POOL CONSTRUCTION
POOL PREPARATION
POOLS WITH EXCESSIVE DEBRIS
• The cleaner should not be used to remove plaster dust or
construction debris from new or renovated pools.
• Brush the newly constructed pool surface and vacuum new
surface debris before installing the cleaner.
• The cleaner should not be used to remove excessive debris
before a seasonal pool opening or following a high wind
event or sandstorm.
• Pools with excessive amounts of debris should be
vacuumed manually before using the cleaner.
• Always empty the cleaner lter cartridges or debris canister
when lled with debris.
Pool Preparation
• NEVER SWIM WITH THE CLEANER IN THE POOL.
• Before using the cleaner, remove any items such as
thermometers, toys and other accessories from the pool.
Such items may cause damage to the cleaner or the pool.
Large debris should also be removed manually from
the pool before installing the cleaner.
• Chemical balance of water may affect cleaner performance,
accelerate wear of certain parts, and may lead to more
frequent maintenance.
• DO NOT LEAVE THE CLEANER IN THE POOL WHEN
CHEMICAL SHOCKING THE POOL.
• pH should be adjusted and kept between 7.2 – 7.8.
• Free chlorine should be maintained between 1.0 – 3.0 PPM.
The cleaner should never be used when chlorine level
(or other oxidizer) exceeds the normal values.
• Total alkalinity level should always be maintained
between 80 – 150 PPM.
• To keep the pool safe for swimming and protect your
equipment, have the water tested frequently and balance
chemicals accordingly.
pH: 7.2 - 7.8
Cl: 1.0-3.0 PPM
TAC: 80 - 120 PPM
50˚- 100˚F
10˚- 37˚C
Cl
>3.0 PPM
NORMAL DEBRIS PICK-UP
• The SpinTech™ canister is intended to collect most visible
debris by using a selective debris separation system.
• The cleaner is equipped with clog-free, lter-free, and
TouchFree™ debris handling with advanced pick-up capability;
it is not intended to lter very ne particles.
• When ne particles or algae are present in the pool, they will
be put back in suspension to be captured by the pool ltration
system. It is normal to observe some ne dust coming out of
the cleaner when very ne debris load is present.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward AquaVac 650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward AquaVac 650 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info