589950
38
Zoom out
Zoom in
Previous page
1/62
Next page
4. The second person holds the lid (not the handle) and
places the second spanner on the nut on the top of the lid. While
the first person turns the valve anti-clockwise the second
person holds the nut on the top in place. Continue turning the
valve anti-clockwise until the valve is loosened. Unscrew and
remove valve, washer and nut. Discard all parts; do not reuse
any part of the old safety valve.
3. Hold the valve with the washer on it and apply a
small amount of food compatible glue on the valve
threads. Push the valve (with washer) into the safety valve
hole from the underside of the lid and hold in place with
the left hand. Place the nut (chamfered side down, flat corners
up) on the valve on the top side of the lid. Screw the nut in
a clockwise direction until tight.
REMOVING SAFETY VALVE:
VIEW OF UNDERSIDE OF LID
…AND VIEW OF TOP SIDE OF LID
TO REPLACE
1. Clean lid where the safety valve will sit.
2. Unscrew the new nut and keep it to one side with the
chamfered side down. Leave the washer on the valve.
4. Place one spanner on the nut on the top side of the lid and
hold in place along with the lid. The second person holds the
lid and places the second spanner (or ratchet spanner) on the
valve on the underside of the lid and tightens the valve by
turning in a clockwise direction while the nut is held firm. See
the pictures for removing safety valve. Tighten valve securely.
36
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hawkins Ventura at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hawkins Ventura in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info