589950
37
Zoom out
Zoom in
Previous page
1/62
Next page
In case you have to replace certain parts yourself, you will
find the following notes helpful.
Gasket Replacement
If leakage develops along the rim of the cooker body which is
not due to the misalignment of the lid or a dent on the rim or lid curl,
the gasket needs to be replaced. This is simply done by changing
it with a replacement Hawkins Ventura gasket (see page 8).
Replacement of Plastic Handles
The subsidiary handle, the body handle and the lid handle
are replaceable by unscrewing the existing handle and screwing
on the replacement handle with a screwdriver. Clean any
accumulated dirt from the area before attaching the new handle.
If the subsidiary or the body handle is difficult to unscrew,
a second person holding the cooker body firmly while one
person turns the handle screws anti-clockwise will make it
easier. If the lid handle is difficult to unscrew, the lid should be
held on a soft surface such as a folded cloth to avoid
damaging the lid and handle bar. If any of the handles is difficult
to unscrew, immerse the handle in boiling water for about
5 minutes. Remove. Use a cloth or oven mitts when holding the hot
metal and unscrew.
Safety Valve Replacement
1. Get a genuine Hawkins safety valve. The three parts of the safety
valve are:
2. Two 17mm
//
//
/
11
/
16
inch spanners (wrenches) are required
to replace the safety valve – one for holding the nut on the
top of the lid and one for turning the valve on the underside
of the lid. The replacement is easier if one spanner is a ratchet
spanner fitted with a
11
/
16
inch, 12 point socket.
3. A food compatible glue is recommended.
4. Two people are recommended to replace the safety valve.
TO REMOVE
1. Remove the gasket and pressure regulator from the lid.
2. Immerse the lid (but not the plastic handle) in very hot water and
soak for 1 hour. Wipe lid dry.
3. Hold and brace the lid on
a soft surface such as a folded
cloth. Take care not to bend or
warp the lid curl. Do not hold
the lid by the handle. Place the
round end of one spanner (or the
ratchet spanner) on the valve on
the underside of the lid in such a
way that you will be able to exert
downward pressure while turning
the valve anti-clockwise.
ORSPANNERS
RATCHET
SPANNER
35
NUT WASHER VALVE
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hawkins Ventura at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hawkins Ventura in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info