624014
8
Zoom out
Zoom in
Previous page
1/72
Next page
Guided Tour - Model 3500/5500 Front Panel
1. Passive Input jack - If your bass guitar has passive circuitry, connect it to
the Model 3500/5500 here. This standard, 1/4” unbalanced jack provides a high
impedance (100 k Ohms) input sensitivity of 20 millivolts.
2. Active Input jack - If your bass guitar has active circuitry,* connect it to the
Model 3500/5500 here. This standard, 1/4” unbalanced jack provides a high
impedance (100 k Ohms) input sensitivity of 60 millivolts.
3. Pre-Amp A (Tube) control - This determines the amount of preamplification
being provided by special circuitry which delivers the sound of a classic tube
amplifier (this circuitry actually includes a real tube!). Note that when both Pre-
Amp knobs are used at equal settings, the amplifier will be twice as loud as when
only one is used. Avoid setting both Pre-Amp knobs on maximum (“10”), since
the result will almost always be undesirable distortion.
4. Pre-Amp B (Solid State) control - This determines the amount of preampli-
fication being provided by special circuitry which delivers the sound of a solid
state amplifier. Note that when both Pre-Amp knobs are used at equal settings,
the amplifier will be twice as loud as when only one is used. Avoid setting both
Pre-Amp knobs on maximum (“10”), since the result will almost always be unde-
sirable distortion.
5. Compression LED - Provides a visual indicator of the status of the compres-
sion circuitry. When lit steadily green (for example, when the Compression knob
[see #6 on the next page] is set to “Off”), no compression is being applied. When
unlit, compression is being applied to the incoming signal at a ratio of approxi-
mately 2:1. When flashing red, the compression ratio is approaching infinity
(limiting is being applied to peak signals). When lit steadily red, the entire signal
is being limited. This LED “follows” the incoming signal, changing continuously
as different amounts of compression and/or limiting are being applied. For more
information, see the About Compression section on page 12 of this manual.
* Bass guitars that have active circuitry normally require a battery for the circuitry to
be functional.
1
4 5 7 8
3
9 10
11 12
2 6
13
ENGLISH
4
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hartke HA5500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hartke HA5500 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info