624012
9
Zoom out
Zoom in
Previous page
1/20
Next page
7
Guided Tour - 2500 Rear Panel
5. Effect Send jack - Use this 1/4” unbalanced jack to send low impedance (100
ohm) signal from the Model 2500 to a professional outboard effects processor
such as a reverb, echo, chorus, flanger, or harmonizer device.* Output level is
approximately 0 dB to +4 dB and is post-EQ and post-compression but unaffected
by the setting of the Master Volume control. You can also use the Effect Send jack
to route signal to an external mixing console or amplifier with an input sensitivity
of +4 dB.
6. Speaker outputs - Connect any 4, 8, or 16 ohm bass cabinet(s) to these
standard unbalanced 1/4” jacks. WARNING: Because of the high power levels
and low frequency content of the signal generated by the Model 2500, use
only appropriately rated speaker cabinets (at least 250 watts at 4 ohms) that
are specifically designed for bass instruments. We recommend that Hartke
amplifiers be used with Hartke bass cabinets, although other brands of speak
-
ers can be used.
* In-line effects (such as footpedals) intended for low signal levels should be
placed between the bass and the amplifier Input and not connected with the
Effect Send and Return jacks.
** Note that the settings of the ten-band graphic equalizer will affect a “Post”
Direct Out signal regardless of the position of the front panel In/Out switch.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hartke HA2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hartke HA2500 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info