Manual Harman Kardon the bridge (page 3 of 8) (English)

429711

Zoom out

Zoom in

1/8

Press buttons when inserting or removing the plug.

Docking Your iPod

After placing the appropriate insert in

the center well of The Bridge and con-

necting The Bridge to your receiver,

dock your iPod by placing it into the

insert, gently pressing it down until

the connectors mate on the iPod and

The Bridge.

NOTE: If you normally keep your iPod

in a protective case, or “skin,” you will

need to remove it before playing your

iPod in The Bridge.

Using The Bridge

Once The Bridge is connected, you

may use either the front-panel controls

or the AVR’s remote to select tracks

for playback from your iPod.

To select the iPod docked in The

Bridge, press the

DMP/The Bridge

Button

on the remote, or use the

Source Selection Button on the

front panel to change sources, as

described in the receiver’s owner’s

manual. When an iPod is correctly

docked in The Bridge, a message will

appear in the front-panel and on-

screen displays to confirm that

The Bridge is

CONNECTED,

after which the displays will switch to

the iPod navigation menus and the

iPod’s own menu screen will be

replaced by a “check mark” and a

message reading “OK to disconnect”.

NOTE: If the iPod is not properly con-

nected to the dock, a message read-

ing “Please check connection or bat-

tery condition” may scroll across the

bottom line of the receiver’s on-screen

and front-panel displays. If you see

this message, remove the iPod and

insert it in The Bridge again, making

sure that it seats properly.

When an iPod is properly connected

to a receiver via The Bridge (as con-

firmed by the appearance of the

check mark rather than the standard

iPod menus) the iPod’s Click Wheel

and controls do not operate. Instead,

you must use either the receiver’s

front-panel buttons or the remote

control to operate your iPod.

Controlling the iPod

Refer to the table below to select the

front-panel or remote control button

for the desired iPod function. Press

that button to operate the iPod. For

example, to play a track on the iPod,

you would normally press the

›

II icon

at the bottom of the Click Wheel. To

play a track using an iPod docked in

The Bridge, press the

Tune Mode

Button

on the front panel of your

receiver, or the

Play Button on the

receiver’s remote.

Navigating the iPod’s Menus

To help you in selecting tracks and

navigating through the iPod’s contents,

two-line messages will be displayed in

the receiver’s front-panel display and

on the video display connected to

your receiver. In most cases, these

display and navigation messages will

closely mirror the familiar iPod menus.

The upper line of the receiver’s display

will show the title of the current menu,

such as Playlists, Artists, Albums,

Genres, Songs, etc. The lower line will

show each choice available for selec-

tion within that category as you scroll

to it, similar to scrolling down the list

of choices in the iPod’s menu.

iPod Button iPod AVR Front- AVR

Equivalent Function Panel Button Remote Button

›

II Play/Pause Tune Mode Play

‹‹

Previous Track Tune Down

‹‹

››

I Next Track Tune Up

››

Menu Menu Call-Up AM/FM Menu

Select Button Select Function Set Set

›

II Pause Tune Mode Pause

Click Wheel Scroll Preset Up Navigation

Clockwise Forward Arrow Right

›

Click Wheel Scroll Preset Navigation

Counterclockwise

Backward Down Arrow Left

‹

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon the bridge in the language / languages: English as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon the bridge Manual

Product: