Manual Harman Kardon the bridge (page 2 of 8) (English)

429711

Zoom out

Zoom in

1/8

Introduction

Congratulations! With The Bridge

™

you

are entering the new world of listening

enjoyment made possible by combin-

ing the incredible

storage capacity and

playback flexibility

of an iPod

(not

included) with the sonic power of your

Harman Kardon receiver.

With a single, simple connection, your

iPod is connected, and from there all

you need to do is use your remote

control and you are ready to go!

Features

•

Single connection to any The Bridge-

ready Harman Kardon receiver

• Plays audio from an iPod through

your Harman Kardon receiver

• Controls your iPod using the

Harman Kardon remote

• Easy track selection with on-screen

navigation

• Charges the iPod

Selecting the Correct iPod Insert

Each iPod model is a slightly different

size, making it necessary to use an

insert that matches your specific iPod

to The Bridge. The Bridge is shipped

with the insert for the color screen and

photo models already installed; if you

own one of those models, no further

changes are needed.

If you own a different iPod, first select

the insert that matches your model.

The model identification is printed on

the back of each of the four extra

inserts supplied with The Bridge. Note

that the insert marked “Universal”

should not be used alone. It is

designed for use with future iPod

models that are not accommodated

by the current inserts. For more

information or updates, visit

The Bridge section of our Web

site at www.harmankardon.com.

Use the following as a guide to

determine which insert is correct

for your iPod model:

• For any iPod with a color screen,

including all iPod photo models, use

the insert with “COLOR/PHOTO” on

the back. This insert is already

installed in The Bridge.

• For 20GB or 30GB iPod photo

models

only, remove the insert

marked “COLOR/PHOTO” and

attach the two included foam pads

to the rear inside wall in the well of

the insert before replacing it.

• For iPods with a black and white

screen and a 10GB, 15GB or 20GB

hard drive, use the insert with

“10GB/15GB/20GB” on the back.

• For iPods with a black and white

screen and a 30GB or 40GB

hard drive, use the insert with

“30GB/40GB” on the back.

• Use the insert with “mini” on the

back for

all iPod mini models.

• Use the insert with “Universal” on

the back for iPod models that come

with a special insert.

To remove the 30GB iPod photo

insert, or if you need to replace the

insert at a later time when you change

iPod models, hold The Bridge with one

hand and grab the edges of the insert

in The Bridge and pull straight up.

Once you have selected the correct

insert, place it over the well in the

center of The Bridge and gently press

it down so that it snaps into place

NOTE: Do not place an iPod in

The Bridge unless an insert is

installed; otherwise, the iPod will be

prevented from properly connecting,

and damage will be caused to The

Bridge or your iPod that is not covered

by the warranty for either product.

Connecting The Bridge to

Your Receiver

Before connecting The Bridge, turn

your receiver off using its

Master

Power Switch

. You will know that

the power is off when the front-panel

Power Indicator (normally amber

when the unit is in the Standby mode)

goes out. Depending on your receiver

model, the Master Power Switch is

located above the Power Indicator or

behind the front-panel door.

With the receiver off, press the button

on each side of the connector at the

end of The Bridge cable and insert this

plug into The Bridge/DMP port on the

receiver’s rear panel. If the port is hor-

izontal, insert the connector with the

flat side up. If the port is vertical, insert

the connector with the flat side to the

right. In all cases, the connector will

only go in one way. If you inadvertently

try to plug the connector in the wrong

way, do not force it. Simply reverse

the connector and try again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon the bridge in the language / languages: English as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon the bridge Manual

Product: