534547
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
6 7
Wires to Speaker
Terminal Cover
Overhead View
Wire
From
Wall
Plate
The bracket has two openings on top: a round screw hole, and an arc-shaped opening in
front of it. The speaker cable should be threaded through the arc-shaped opening, not the
screw hole.
Attach the bracket to the wall plate by inserting the tab at the top of the attachment plate
into the slot on top of the bracket and snapping the bracket onto the attachment plate.
Thread the cable through the round opening in the terminal cover, and then insert the
speaker wires into the terminals on the underside of the speaker, remembering to observe
the correct polarity (see “Speaker Connections”).
Place the terminal cover over the opening on the underside of the speaker so that it fits
flush against the speaker and covers the terminals, with its round opening exposing the
threaded insert. The bracket fits through the round opening in the terminal cover.
Wall Bracket
Insert the supplied bracket bolt up through the bottom of the bracket and terminal cover,
and screw it into the threaded insert on the underside of the speaker. The bolt should be
snug, but not so tight as to prevent the bracket from pivoting.
The wall-mounted speaker may be pivoted from side to side; however, the bracket is not
designed to tilt up or down, and attempting to tilt it will damage the bracket and possibly
the wall, which would not be covered by your warranty.
Wall
23mm
or about
3/4"
(M6-1.25P
or 1/4"-20)
Speaker Connections
IMPORTANT NOTE: Before making speaker connections, be certain that your receiver or
audio power amplifier is turned off and preferably unplugged from its AC power source.
Do not connect the HKTS200SUB subwoofer to an AC power source until you have made all
speaker wire connections.
Speakers and electronics terminals have corresponding (+) and (–) terminals. Most
manufacturers of speakers and electronics, including Harman Kardon, use red to denote
the (+) terminal and black for the (–) terminal.
Newer Harman Kardon receivers conform to the CEA standard and therefore use a color
other than red or black for the (+) terminal to indicate some speaker positions: e.g.,
surround left.
Although the HKTS 9/16 system has red and black collars on the individual speaker
terminals to denote the positive and negative connections, your system includes a colored
band on the positive lead at both ends of every speaker cable and a matching colored
sticker for each of the four satellite speakers, conforming to the key on page 5. The center
speaker has a green (+) terminal, and the subwoofer has a purple SUB input jack. This
system is intended to help you ensure that the speaker in each location is connected to
the correct terminals on your receiver or amplifier.
The (+) lead of the speaker wire is indicated with a stripe and has the colored band
corresponding to the speaker’s position. It is important to connect all speakers identically:
(+) on the speaker to (+) on the amplifier and (–) on the speaker to (–) on the amplifier.
With the advent of multi channel surround-sound systems, connecting all of the speakers
in your system with the correct polarity remains equally important in order to preserve
the proper ambience and directionality of the program material.
To connect the supplied speaker wires to the satellite and center speaker terminals
located on the bottom of each speaker, press the red or black tab, insert the bare end of
the wire into the hole, and release the tab. Gently tug on the wire to make sure that it is
fully inserted.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon HKTS 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon HKTS 9 in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon HKTS 9

Harman Kardon HKTS 9 User Manual - German - 12 pages

Harman Kardon HKTS 9 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info