Your HKTS 65 system is designed for trouble-free operation. Most problems that users encounter are due to operating or connection errors.
So if you have a problem, rst check this list for a possible solution. If the problem persists, consult your authorized Harman Kardon service center.
ProblemSolution
If there is no sound from any of the speakers:• Check that the receiver/amplier is on and a source is playing.
• Make sure that all wires and connections between the receiver/amplier and the speakers are connected properly.
• Make sure that the speaker wires are not frayed, cut or punctured.
• Review the proper operation of your receiver/amplier.
If there is no sound coming from one speaker:• Make sure that all wires and connections between the receiver/amplier and the speaker are connected properly.
• Make sure that the speaker wires are not frayed, cut or punctured.
• Check that the balance control on your receiver/amplier is not set all the way to one channel.
• Check your receiver/amplier’s speaker setup procedure to make sure that the speaker in question has been enabled
and its volume level has not been turned all the way down.
If there is no sound coming from the center speaker:• Make sure that all wires and connections between the receiver/amplier and the center speaker are connected properly.
• Make sure that the speaker wires are not frayed, cut or punctured.
• Check your receiver/amplier’s speaker setup procedure to make sure that the center speaker has been enabled and
its volume level has not been turned all the way down.
• I f your receiver is operating in Dolby
®
Pro Logic
®
mode, make sure that the center speaker is not set to Phantom.
If there is no sound coming from the surround speakers:• Check your receiver/amplier’s speaker setup procedure to make sure that the surround speakers have been enabled
and their volume levels have not been turned all the way down.
• Make sure that all wires and connections between the receiver/amplier and the surround speakers are connected
properly.
• Make sure the speaker wires are not frayed, cut or punctured.
• Review proper operation of your receiver/processor and its surround sound features.
• Make sure the movie or TV show you’re watching has been recorded in a surround-sound mode. If it is not, check to see
if your receiver/amplier has a different surround-sound mode that you can use.
• Review the operation of your DVD player and the DVD jacket to make sure the DVD features the desired Dolby Digital
or DTS
®
surround-sound mode, and that you have properly selected that mode using both the DVD player’s menu and
the disc’s menu.
If there is no sound coming from the subwoofer:• Check that the subwoofer’s Power cord is plugged into a working AC outlet.
• Check that the subwoofer’s Power switch is in the “On” position.
• Check that the subwoofer has been properly connected to your receiver/amplier.
• Check that the subwoofer’s Level control is not turned all the way down.
• Check your receiver/amplier’s speaker setup procedure to make sure that the subwoofer has been enabled and its
volume level has not been turned all the way down.
Wireless operation:
• Check that the transmitter is properly connected to your receiver/amplier.
• Make sure that the Wireless Code switches on the transmitter and subwoofer are both set at the same setting.
If the system plays at low volumes but shuts off as
volume is increased:
• Make sure that all wires and connections between the receiver/amplier and the speakers are connected properly.
• Make sure none of the speaker wires is frayed, cut or punctured.
• If you’re using more than one pair of main speakers, check to be sure that you’re not operating the system below the
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Harman Kardon HKTS 65BQ at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Harman Kardon HKTS 65BQ in the language / languages: English as an attachment in your email.
The manual is 3,79 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
