769909

Harman Kardon HKTS 2 MkII Manual

4
Zoom out
Zoom in
Previous page
1/16
Next page
4REAR PANEL CONNECTIONS
Rear Panel Connections
RISK OF ELECTRIC SHOCK
DO NO T OPEN
CAUTION
RISK OF ELECTRIC SHOCK
DO NO T OPEN
CAUTION
RISK OF ELECTRIC SHOCK
DO NO T OPEN
SUB-TS2 For use with
HKTS 2BQ,HKTS 2WQ
HKTS 2 System
Subwoofer-Level Control: Volume
may be adjusted using the Subwoofer-Level
Control. Turn the control clockwise to increase
the subwoofer’s volume, or counterclockwise to
decrease it.
High-Cut (Low-Pass) Filter Switch: Plac-
ing this switch in the
ON
position activates cir-
cuitry that cuts out all audio input signals above
120Hz. This allows the subwoofer to focus its
power on reproducing the low-frequency portion
of the signal, avoiding inefficiency and
distortion. Engage this filter when using the
Speaker-Level Inputs
, or when using the
Line-Level Full-Range Inputs
, unless your
receiver or processor processes its line-level
output using a low-pass filter. The filter has no
effect when the Sub Input
is used.
Trigger Input: Some receivers or sound
processors have a Trigger Output that sends a
signal to the subwoofer to switch on or off. If
your receiver has such a Trigger Output, connect
it here. When placed in the
AUTO
position, and
when the Master Power Switch
is turned
on, the subwoofer will automatically turn itself
on or place itself in the Standby mode,
depending on the status of your receiver or
processor. When this switch is placed in the
ON
position, the subwoofer will remain on, whether
or not it is receiving an audio signal.
An LED located on top of the subwoofer
indicates whether the subwoofer is in the On or
standby state when used with the Trigger
On/Off Switch
in the
AUTO
position. The
LED is lit blue to indicate that the subwoofer is
receiving an audio signal and is turned on, and
the LED is lit amber to indicate that no signal is
being received and the subwoofer is in Standby
mode.
When the Trigger On/Off Switch
is in the
ON
position, the LED will be lit blue, whether or
not an audio signal is present.
When the Master Power Switch
is turned
off, the LED goes dark, no matter which position
the Trigger On/Off Switch
is in.
Subwoofer-Level Control
High-Cut (Low-Pass) Filter Switch
Trigger Input
Phase Switch
Line-Level Subwoofer (SUB) Input
Line-Level Full-Range Inputs
Speaker-Level Outputs
Speaker-Level Inputs
Master Power Switch
AC Power Cord
0127CSK - HK TS2_ENG.qxp:29515_HKTS2_English 18/03/09 16:07 Side 4
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon HKTS 2 MkII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon HKTS 2 MkII in the language / languages: English as an attachment in your email.

The manual is 0.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info