502808
18
Zoom out
Zoom in
Previous page
1/28
Next page
18
18
INSTALLATION
We recommend you follow the guidelines in Table 2 when connecting
various source components to the HK 3385. However, due to the
limitations in the design of the HK 3385 remote control, when using
source components manufactured by other brands, you may need to
use the device’s original remote control to operate it. Alternatively, you
may wish to consider purchasing the Harman Kardon TC 30 activity-
based remote control, which is custom-programmed by accessing a
vast Internet library of remote control codes for numerous brands and
types of products.
For each audio-only source, such as a CD player, simply connect the left
and right analog audio outputs of the source device to the correspon-
ding inputs on the HK 3385. For audio/video devices, such as a cable
television set-top box, in addition to the audio connections, connect the
composite video output on the set-top box to the corresponding video
input jack on the HK 3385.
Phono (Turntable)
Connect the audio outputs of your turntable or tonearm with a moving-
magnet (MM-type) cartridge to the Phono Inputs, and connect the
ground wire to the Ground Terminal immediately above the Phono Inputs
(not the AM Antenna Ground Terminal). If the cartridge is a moving-coil
(MC-type) cartridge, it requires a separate phono preamp (available at
your local electronics store) before you connect it to the Phono Inputs.
See Figure 12.
Figure 12 – Phono Inputs and Ground
If your turntable has an MM-type cartridge and a built-in phono preamp,
do not
connect it to the Phono Inputs. Use one of the other available
audio input sources on the HK 3385.
Compact Disc (CD) Player
Connect the analog audio outputs of your CD player (or another audio-
only device) to the CD Audio Inputs. See Figure 13.
Figure 13 – CD Audio Inputs
Tape
The Tape source is used for audio recorders, such as a CDR, MiniDisc
or cassette deck.
Connect the output jacks on your recorder to the Tape Audio Input jacks
on the HK 3385, and the input jacks on your recorder to the Tape
Output jacks on the HK 3385. See Figure 14.
Figure 14 – Tape/CDR Audio Inputs and Outputs
If your tape deck is a three-head unit or has off-head playback capability,
you may monitor recordings by repeatedly pressing the Tape Source
Selector on the front panel or remote until the dot to the left of the Tape
Input Indicator in the front-panel display flashes.
Video 1 Source
Since this source includes audio and video recording output jacks, it is
best suited to a video recorder, such as your VCR or DVR, even though
the remote codes are programmed to operate a DVD player. Simply use
your video recorder’s original remote or the Harman Kardon TC 30.
Connect your recorder to the Video 1 Audio Inputs and Outputs. Then
connect the recorder to the Video 1 Composite Video Input and Output.
See Figure 15.
Figure 15 – Video 1 A/V Inputs and Outputs
Remember to connect the audio and video
output
jacks on your
recorder to the Video 1
Input
jacks on the HK 3385, and the audio and
video
input
jacks on your recorder to the Video 1
Output
jacks on the
HK 3385.
Source Input Remote Control Device Type
Phono Operates HK 3385 only
Video 1 Harman Kardon DVD player
Video 2 Harman Kardon DVD player
Video 3 Harman Kardon DVD player
Tape/CDR Harman Kardon CD recorder
CD Harman Kardon CD player
AM/FM Operates HK 3385 only
Table 2 – Remote Control Device Types
HK 3385 OM 4/13/07 12:03 PM Page 18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon HK 3385 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon HK 3385 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info