Changing Navigation Settings
Touching the NAVIGATION SETTINGS
button displays the NAVIGATION
SETTINGS screen (right).
AVOIDANCES: When the
GPS-200/300 calculates naviga-
tion routes, you can set it to
always avoid the following:
• U-turns
• Unpaved roads
• Toll roads
• Roads requiring permits
(Backroads)
• Highways
• Border crossings
• Ferries
• Traffic (TMC)
(Not available in GPS-200IT.)
NOTE: The GPS-200/300 comes from the factory with the UNPAVED ROADS avoidance set to ON.
DISTANCE UNITS: You can set the GPS-200/300’s distance units to kilome-
ters/meters, miles/feet or miles/yards. This affects the units shown on the
screen, and the units given during voice navigation prompts.
ROUTE PRIORITY: When the GPS-200/300 calculates navigation routes, you
can set it to give priority to either the S
HORTEST DISTANCE or the SHORTEST TIME .
GPS DATA: This screen displays the following information:
NOTE: Your GPS-200/300 will lose contact with the GPS satellites whenever you turn its
power off. After turning the power back on, you will need to go outside to receive the
GPS signal again before the navigation functions will operate.