139373
23
Zoom out
Zoom in
Previous page
1/40
Next page
23 SETUP MENU
Setup Menu
To select the Video Output you must first be
viewing the Setup Menu (Figure 1), which is
available by pressing the
Menu Button
while the unit is in the Stop mode. At the Setup
Menu, press the
¤
Navigation Button e
until the Video Output option is highlighted.
Press the Enter Button ` to view the
options for this selection (Figure 11).
Figure 11
If you are using the S-Video output only, no
change is required, but it is a good idea to
check this option to make certain that the circle
next to the S-Video option is orange.
If you are using the Component Video jacks, but
are connecting the DVD 50 to a standard (ana-
log) television, press the
/
¤
Navigation
Buttons e so that the circle next to the
word Componentis orange. Press the
Enter
Button ` to store the setting in the DVD 50s
memory, but DO NOT change the setting in the
bottom half of the menu box. The orange circle
in the Progressive section of the menu should
be next to Off.
If you are using the Component Video jacks for
connection to a video display that is compatible
with a progressive scan signal, first press the
Navigation button so that the circle next to
the word Componentis orange. Next, press
the
Enter Button `, then press the
/
Navigation Buttons e so that the orange
circle in the lower portion of the menu box
under the word Progressiveis next to the
word On. Press the
Enter Button ` to
enter the setting to the DVD 50s memory.
WARNING: Once the setting for progressive
scan output is entered, an image will only be
visible on a progressive scan-compatible
video display. If you change the setting to
ProgressiveScan in error, you must reset the
unit by first pressing the
Stop Button j/!
to stop any disc that is playing. Next, press the
Stop Button j/! again and hold it for
five seconds before releasing it. Turn the unit
off and pause for a few seconds. When you turn
the DVD 50 on again, the video output will be
restored to the standard setting, and a picture
will once again be visible on a conventional
analog display.
If you have no further changes to make after
setting this default, press the
Menu Button
to remove the Setup Menu from the
screen, or press the
Play Button g/# to
resume playback.
To enable the Auto Play function you must first
be viewing the Setup Menu (Figure 1), which is
available by pressing the
Menu Button
while the unit is in the Stop mode. At the Setup
Menu, press the
/
¤
Navigation Button
e until the Auto Play option is highlighted.
Press the
Enter Button ` to view the
options for this selection (Figure 12).
DVD Auto Play
The DVD 50s Auto Play function makes it easier
and more enjoyable to view DVDs. When this
feature is activated, the unit will automatically
start playback when the Main Menu of a DVD
appears if no other button is pressed within
three seconds of the time the Main Menu
appears. In normal use, most discs stop at the
Main Menu to wait for your input, requiring
some user intervention. With Auto Play, DVD
viewing is seamless, as the start of the movie is
automatically selected unless another function
is specifically requested. Of course, even with
Auto Play in effect, you may always customize
the discs playback by pressing any button to
make your selection within three seconds.
Figure 12
To enable the Auto Play function, press the
¤
Navigation Button e so that the circle
next to the word Autois orange. Next, press
the
Enter Button ` to activate the feature
and store the setting in the DVD 50s memory.
Note that the
AUTOPLAY Indicator I
will light to remind you that DVD discs will go
directly into the Play mode, rather than stop at
their Main Menu.
To disable the Auto Play function, press the
Navigation Button e so that the circle
next to the word Offis orange. Next, press
the
Enter Button ` to store the setting in
the DVD 50s memory. If the setting was previ-
ously active, the
AUTOPLAY Indicator I
will go out.
If you have no further changes to make after
setting this default, press the Menu Button
to remove the Setup Menu from the
screen, or press the
Play Button g/# to
resume playback.
28
28
28
28
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon dvd 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon dvd 50 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info