139371
9
Zoom out
Zoom in
Previous page
1/34
Next page
9
Setup and Connections
• Ensure that the power switch of this unit and other equipment to be
connected is set to off before commencing connection.
• Do not block ventilation holes of any of the equipment and arrange
them so that air can circulate freely.
• Read through the instructions before connecting other equipment.
• Ensure that you observe the color coding when connecting audio and
video cables.
• Select the appropriate screen shape at the initial setting “TV Aspect ”
according to your TV set (4:3 or 16:9), see page 26.
TV
To S-Video input
To audio input (red/white)
To power outlet (AC 230V/50 Hz)
To video input
(yellow)
Note:
• If the DVD/CD player is connected to the TV through a video cassette
recorder, the picture may not be played back normally with some DVDs.
If this is the case, do not connect the player via the VCR.
The S (separate) video output connector separates the color (C) and
luminance (Y) signals before transmitting them to the TV set in order to
achieve a sharper picture. Use the S-video cable (optional) when con-
necting the player to a TV set equipped with an S-video input for
improved picture clarity.
• Most European TV´s are equipped with SCART connectors rather than
with a normal video input (yellow cinch). In that case the SCART con-
nection should be used, providing the audio signal too, (see page 8).
Use separate analog audio connections to TV only if your TV is
connected to the video or S-video output.
When the audio signal is fed to stereo or Pro Logic amplifiers/decoders
or receivers rather than to the TV, connect the Audio Out jacks to any
normal audio input on your amplifier/decoder/receiver.The DVD10 will
”downmix” Dolby Digital recordings to Pro Logic, available on these
connectors, all analog surround or stereo signals will be fed to them
directly.
Connecting to a stereo TV set and stereo or Pro Logic Amplifier/Receiver
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon dvd 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon dvd 10 in the language / languages: English as an attachment in your email.

The manual is 14,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info