139371
8
Zoom out
Zoom in
Previous page
1/34
Next page
8
Rear Panel
12 3 4
6
789
9
5
1. OPTICAL OUT: Use optical cable (not provided) to connect your DVD
Player to a compatible Dolby Digital or DTS receiver or decoder. Dolby
Digital and DTS offer theater-quality sound (5.1-Channels).
2. COAXIAL OUT: Use coaxial cable (not provided) to connect your DVD
Player to a compatible Dolby Digital or DTS receiver or decoder. Dolby
Digital and DTS offer theater-quality sound (5.1-Channels).
3. AUDIO OUT: Insert audio cables (left and right) to these jacks on
your DVD Player and to the corresponding Audio Input jacks (left and
right) on your TV or receiver.
4. S-VIDEO OUT: If your TV has an S-Video jack, you can connect an
S-Video cable to your TV and to your DVD Player for improved video
quality. The S-Video cable only carries the video signal; remember to
connect the left and right audio cables.
5. VIDEO OUT: Connect a video cable to this jack and to the Video
Input jack on your TV.The video cable only carries the video signal;
remember to connect the left and right audio cables.
6. SCART OUT (AUX): If an external playback unit has a SCART socket,
you can connect a SCART cable to it and to your DVD Player.The
SCART cable carries both audio and video signals of the external unit.
These signals will be routed through the SCART connector of the DVD
to the TV when the DVD player is turned on.
7. SCART OUT (TV): If your TV has a SCART socket, you can connect a
SCART cable to your TV and to your DVD Player for improved video
quality. The SCART cable carries both audio and video signal.
Your DVD10 is equipped with two SCART connectors, one for direct
connection to the TV, the second for throughput of VCR (playback
only) or any other playback video source to a TV with only one SCART
input.
8. Remote IR Input: Connect the output of a remote infrared sensor or
the remote control output of another compatible Harman Kardon
product to this jack. This will enable the remote control to operate
even when the front-panel Remote Sensor on the DVD10 is blocked.
This jack may also be used with compatible IR remote control based
automation systems. Remote IR Output: Connect this jack to the IR
input jack of another compatible Harman Kardon remote controlled
product to have the built-in Remote Sensor on the DVD10 provide IR
signals to other compatible products.
9. AC CORD (230V / 50Hz): Plug AC Cord to an unswitched 220-
240Volt AC outlet.
Note: you’ll find more details about all Audio/Video connections under
Setup and Connections on the following pages.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon dvd 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon dvd 10 in the language / languages: English as an attachment in your email.

The manual is 14,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info