613820
13
Zoom out
Zoom in
Previous page
1/37
Next page
Mounting Options for Satellite and Center Speakers
13
BDS
Wall-Mounting the BDS 800 Center Speaker
1. Decide on the location for the speaker (see Placing the Speakers (BDS 800, BDS
700, BDS 400 and BDS 300 Systems), on page 10).
2. Attach the center-speaker wall-mount bracket to the wall using hardware that is
appropriate for the wall’s construction and materials. Attach the anchors through
the holes shown in the illustration.
Use These Holes to
Attach Bracket to Wall
NOTE: The center speaker weighs 3.2 lb (1.45kg). Be sure to use hardware that can
support this weight.
CAUTION: Before making speaker connections, be sure that your receiver or amplifier
is turned OFF and, preferably, its AC cord is unplugged from the AC power source.
3. Connect the speaker wire to the speaker terminals.
+
A. Push Down on Cap
to Open Hole
B. Insert Bare Wire
into Open Hole
C. Release Cap to
Secure Wire
Colored Band to
Red Terminal
4. Using two of the supplied screws, attach the center speaker to the wall-mount
bracket, as shown in the illustration.
Wall-Mount
Bracket
Supplied Screws
Wall-Mounting the BDS 700 and BDS 300 Satellite Speakers
1. Remove the black shelf stand from the bottom of the speaker by unscrewing the bolt.
Store the shelf stand and bolt in a safe place in case you need them in the future.
1. Remove Bolt
2. Remove Stand
2. Determine the locations for the speakers. (See Placing the Speakers (BDS 800,
BDS 700, BDS 400 and BDS 300), on page 10, for more information.) If possible,
position the speakers so that the mounting screws (not included; use size #8)
can be installed directly into a wall stud. If that is not possible, use optional wall
anchors that are rated to support at least 25 lb (11.3kg) and are appropriate for
the construction and materials of your wall. The customer is responsible for the
proper selection and use of mounting hardware, available through hardware
stores, to wall-mount the speakers properly and safely.
3. Bring the speaker cable through the wall-bracket attachment plate, and mount the
attachment plate on the wall in the desired location.
Bring Speaker Cable
Through Opening
4. Thread the speaker cable through the arc-shaped opening on the top of the
mounting bracket, not the screw hole.
Cable to
Speaker
Cable from
Wall Plate
Side ViewOverhead View
Bring Speaker Cable
Through Arc-Shaped
Opening
5. Attach the mounting bracket to the wall plate by inserting the tab at the top of the
attachment plate into the slot on top of the bracket and snapping the bracket onto
the attachment plate.
Insert Tab into Slot
and Snap Bracket
onto Plate
Feed Cable Through
Mount and out of
Opening
6. Fit the terminal cover onto the bracket as shown in the illustration below, then
connect the speaker leads to the terminals on the underside of the speaker.
Remember to observe the correct polarity. See Connecting the Satellite and Center
Speakers (BDS 700 and BDS 300 systems), on page 15, for more information.
Terminal Cover
Mounting Bracket
Side View
Connect Cable Leads
to Speaker Terminals
7. Fit the terminal cover into the opening on the underside of the speaker so that it is
flush against the speaker and covers the terminals. Insert the supplied long bracket
bolt up through the bottom of the bracket and terminal cover, and screw it into the
threaded insert on the underside of the speaker. The bolt should be snug but not so
tight as to prevent the speaker from pivoting on the bracket.
Fit Terminal Cover
into Recess on
Speaker Bottom
Attach Speaker
to Bracket Using
Long Bolt
You can pivot the wall-mounted speaker from side to side; however, attempting to tilt it
up or down will damage the bracket and possibly the wall, which would not be covered
by your warranty.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS485 in the language / languages: English as an attachment in your email.

The manual is 7,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS485

Harman Kardon BDS485 User Manual - German - 10 pages

Harman Kardon BDS485 User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info