613820
11
Zoom out
Zoom in
Previous page
1/37
Next page
11
BDS
Placing the Speakers (BDS 600 System)
Placing the Front Left and Front Right Speakers
If your TV is placed on a table, you can place the soundbar on the table directly in front
of the TV, centered with the TV screen. Attach the supplied rubber feet to the soundbar
as shown in the illustration.
If your TV is located in an entertainment or media center, you can mount the soundbar in
a space directly above or below the TV.
WARNING: Do NOT place the soundbar directly on top of a TV or at the front edge
of a table or cabinet. It could roll forward and injure someone.
Wall-Mounting the Soundbar
If your TV is attached to a wall, you can use the included wall-mount brackets to mount
the soundbar on the wall directly below the TV screen.
Determine the location for the soundbar on the wall. Make sure that the top of the 1.
soundbar will not block your view of the TV screen when it is mounted on the wall.
Mark the locations of the soundbar wall-mount bracket holes on the wall. The holes 2.
for the left and right brackets are spaced 600mm apart. The top and bottom holes
for each bracket are spaced 25mm apart. See the illustration below.
600mm
25mm
NOTE: To insure that the soundbar will be level, use a carpenter’s level, a laser sight or
another device to insure that the two sets of holes are at exactly the same height.
Attach the two wall-mount brackets to the wall at the locations you marked, using 3.
hardware that is appropriate for the wall’s construction and materials. Note that
the soundbar weighs 8.1 lb (3.67kg). Be sure to use hardware that can support
this weight.
After making all of the connections described in the 4. Connections section, on page
14, attach the soundbar to the brackets by sliding the slots in its rubber bumpers
onto the brackets’ vertical tabs.
Slide Slots in Rubber Bumpers
onto Tabs on Brackets
Placing the Subwoofer
Follow the subwoofer placement directions in Placing the Speakers (BDS 800, BDS 700,
BDS 400 and BDS 300 Systems), on page 10.
Mounting Options for Satellite and Center Speakers
Shelf Placement
You can place the satellite and center speakers on shelves. BDS 800 and BDS 400
satellite speakers have built-in bases for shelf placement. If you want, you can remove a
base by pulling it straight off its speaker. Apply even pressure to both sides of the base
and smoothly slide it off the speaker.
Apply Pressure Evenly
to Both Sides of Base
Lift Base Straight
off Speaker
Wall-Mounting the BDS 800 and BDS 400 Satellite Speakers
IMPORTANT: Read the Connections section, on page 14, before wall-mounting the
satellite speakers. You will need to insert the speaker wires through the wall-mount
brackets and connect the wires to the speakers during the process of installing the
brackets.
NOTE: If you are using your own speaker wire, it must be no thicker than the wire
supplied with the speakers. Thicker wire will prevent the wall-mount bracket from
sliding onto the speaker.
1. Decide on the location for the speaker (see Placing the Speakers (BDS 800, BDS
700, BDS 400 and BDS 300 Systems), on page 10).
2. Remove the speaker’s base as explained in Shelf Placement, on this page.
3. Disassemble the wall-mount bracket by pulling the two sections apart.
Pull Sections
Apart
Placing the Speakers (BDS 600 System) and
Mounting Options for Satellite and Center Speakers
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS485 in the language / languages: English as an attachment in your email.

The manual is 7,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS485

Harman Kardon BDS485 User Manual - German - 10 pages

Harman Kardon BDS485 User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info