642269
10
Zoom out
Zoom in
Previous page
1/23
Next page
BDS 335/635 System
10
Mounting OptionsSpeaker Placement and Mounting Options
Subwoofer
The low-frequency sound reproduced by the subwoofer is mostly omnidirectional, and
this speaker may be placed in a convenient location in the room. However, the best
reproduction of bass will be heard when the subwoofer is placed in a corner along the
same wall as the front speakers. Experiment with subwoofer placement by temporarily
placing the subwoofer in the listening position and moving around the room until the
bass reproduction is best. Place the subwoofer in that location.
Surround Speakers
Place the two surround speakers slightly behind the listening position. Ideally, they
should face each other and be at a level higher than the listeners’ ears. If that is not
possible, they may be placed on a wall behind the listening position, facing forward.
The surround speakers should not call attention to themselves. Experiment with their
placement until you hear a diffuse, ambient sound accompanying the main program
material heard in the front speakers.
Mounting Options
You can place the satellite and center speakers on shelves using their built-in stands, or
you can wall-mount them using the supplied hardware.
Wall-Mounting the Satellites
1. Remove the black shelf stand from the bottom of the speaker by unscrewing the
bolt. Store the shelf stand and bolt in a safe place in case you need them in the
future.
2. Determine the locations for the speakers. If possible, position the speakers so that
the mounting screws (not included; use size #8) can be installed directly into a wall
stud. If that is not possible, use optional wall anchors that are rated to support
at least 25 lb (11.3kg) and are appropriate for the construction and materials of
your wall. The customer is responsible for the proper selection and use of
mounting hardware, available through hardware stores, to wall-mount
the speakers properly and safely.
3. Bring the speaker cable through the wall-bracket attachment plate, and mount the
attachment plate on the wall in the desired location.
4. Thread the speaker cable through the arc-shaped opening on the top of the
mounting bracket, not the screw hole.
5. Attach the mounting bracket to the wall plate by inserting the tab at the top of the
attachment plate into the slot on top of the bracket and snapping the bracket onto
the attachment plate.
6. Fit the terminal cover onto the bracket as shown in the illustration below, then
connect the speaker leads to the terminals on the underside of the speaker.
Remember to observe the correct polarity.
7. Fit the terminal cover into the opening on the underside of the speaker so that it is
flush against the speaker and covers the terminals. Insert the supplied long bracket
bolt up through the bottom of the bracket and terminal cover, and screw it into the
threaded insert on the underside of the speaker. The bolt should be snug but not so
tight as to prevent the speaker from pivoting on the bracket.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS 335 Systeem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS 335 Systeem in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS 335 Systeem

Harman Kardon BDS 335 Systeem User Manual - German - 22 pages

Harman Kardon BDS 335 Systeem User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info