502655
36
Zoom out
Zoom in
Previous page
1/40
Next page
AVR85 120 rev (g) 6/14/97
Multiroom Operation
4. If the FIXED option has been chosen,
use the or buttons i to enter the
desired volume level for the multiroom
output, as indicated by the numbers in
the highlighted video box. When the
VARIABLE option is chosen, this is the
volume setting that
will be used when the multiroom system
is first activated. In either case, set the
level as close to “0dB” as possible without
causing distortion in the output signal.
When the desired number has been
entered, press the ¤ button and then
Select to return to the main menu.
5. Press the
button i once so that
the on-screen cursor is pointing to
MULTI ROOM SEL and press Select
j. This will take you to the MULTI
ROOM SELECTOR menu.
6. At the MULTI ROOM SELECTOR
menu (see figure #18) use the or
buttons to select the input to the multi-
room system when the FIXED option is
selected. When the desired source is high-
lighted in reverse video, press the ¤ but-
ton twice and then press Select j to
return to the main menu. You may then
exit the menu system or adjust other
functions.
Operation
Multiroom operation is simple, and
it may be controlled from either the
main listening room where the AVR85 is
located, or from a remote room where an
IR receiver has been installed.
Main Room Control
To activate the feed to the remote room
from the room where the AVR85 is locat-
ed, press the Multi button #h on the
front panel or remote.
If the VARIABLE option was selected in
SETUP MENU 4, the Multi indicator
D will flash, indicating that Source Link
is in effect. This means that any change
to the AVR85 input in the main room will
also change the input to the remote zone
audio output. If the FIXED option was
selected, the Multi indicator will illumi-
nate in a steady state and the input to the
remote room will be the source selected
in the MULTI ROOM SELECTOR
menu.
Once the remote room feed is turned on,
it will remain on even if the AVR85 is
turned off for main room listening and
the front panel indicators go dark. The
Multi indicator will remain lit to remind
you that the feed is still active. To turn the
remote feed off, simply press the Multi
button #h. An on-screen message will
appear (see figure #19) to remind you
that people may be listening in another
room. Press the Multi button a second
time to turn the remote feed off, or press
the Clear button x to cancel the
menu and leave the remote room feed
on. Note that in some sources there may
be no code programmed into the Clear
button, so the menu will disappear from
the screen automatically in about ten
seconds.
33
MULTI RM VOL
VARIABLE
FIXED
SET LEVEL -30dB
RETURN TO MAIN MENU
SETUP MENU 4
Figure 17
SELECTED:TUNER TV
CD DVD
TAPE1 VCR1
OFF TAPE2 VCR2
AUX
VOL LEVEL:-37dB VARI
RETURN TO MAIN MENU
MULTI ROOM SELECTOR
Figure 18
TURN MULTI-ZONE OFF?
USERS MAY BE LISTENING
IN OTHER ROOMS
PRESS AGAIN TO PROCEED
OR "CLEAR" TO CANCEL
Figure 19
AVR85 om (g) 9/16/98 11:21 AM Page 33
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR85 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info