502655
34
Zoom out
Zoom in
Previous page
1/40
Next page
Advanced Features
AVR85 120 rev (g) 6/14/97
31
MODE
DOLBY DIGITAL
DOLBY PRO LOGIC
DOLBY 3 STEREO
MOVIE SURROUND
HALL SURROUND
MATRIX SURROUND
STEREO
FEATURES
This mode is used only when the source material is encoded with Dolby Digital (AC-3)
data. It provides up to five separate main audio channels and a special dedicated Low-
Frequency Effects channel. Use this mode with DVD, LV or HDTV sources.
Dolby Pro Logic is the standard mode for surround sound decoding. It uses
information encoded in a two-channel stereo recording to produce four distinct
channels: Left, Center, Right and Surround. Use this mode for accurate reproduction
of programs bearing the Dolby Surround, DTS Stereo, UltraStereo or other
“Surround” logos. Surround encoded programs include videocassette, DVD and LD
movies, TV and cable programs, radio programs and audio CDs. Dolby Pro Logic
processing may also be used to provide a pleasing surround effect with some
stereophonic source material that does not carry surround encoding.
Dolby 3 Stereo uses the information contained in a surround encoded or two-channel
stereo program to create center channel information. In addition, the information
that is normally sent to the rear channel surround speakers is carefully mixed in with
the front left and right channels for increased realism. Use this mode when you have a
center channel speaker, but no surround speakers.
Movie Surround processing uses matrix surround decoding, with the option to extend
the delay time to 90 ms. Use this to experiment with surround times above 30 ms, or if
the delay time formula suggests a longer time delay for your room.
This mode is designed for use with stereo recordings. It provides a sound-field effect
that simulates the complex combination of direct and reflected sounds that create
the rich reverberant atmosphere of a medium-sized circular concert hall.
This mode is designed for use with sports broadcasts, live concerts or other programs
where the feeling of a wide surround effect is desired.
This mode turns off all surround processing and presents the pure left and right
channel presentation of two channel stereo programs.
DELAY TIME RANGE
Center: 0 ms – 5 ms
Surround: 0 ms –15 ms
15 ms – 30 ms
Initial Setting = 20 ms
No Surround Channels
40 ms – 90 ms
Initial Setting = 40 ms
40 ms – 90 ms
Initial Setting = 40 ms
40 ms – 90 ms
Initial Setting = 40 ms
No Surround Channels
Surround Mode Chart
The first time a PCM source is played the
AVR85 will automatically select the
Stereo mode, but you may then select
any surround mode desired.
Recording When Digital Sources
Are In Use
Since the record outputs of the AVR85
are traditional two-channel stereo, the
multichannel outputs of a Dolby Digital
signal are not available for recording.
When a Dolby Digital signal is being
played, the accompanying analog audio
signal is sent to the Tape Out and VCR
Out jacks £∞fj. The video source
being output is the last selected video
input shown in the Visual indicator Q.
AVR85 om (g) 9/16/98 11:21 AM Page 31
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR85 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info