NOTE: To make it easier to follow the instructions that refer to this illustration,a larger copy may be downloaded from the Product Support section for this product at
www.harmankardon.com.
The following controls and jacks are located behind the front-panel door.To open the door, place the edge of a finger on the left or right bottom edge of the panel and gently
swing the door down toward you.
Main Power Switch: Press this switch to
apply power to the AVR 7300.When the switch is
pressed in,the unit is placed in a Standby mode,as
indicated by the lighting around the Standby/On
Button 1turning amber.The switch MUST be
pressed in to operate the unit.To turn the unit off and
prevent the use of the remote control,this switch
should be pressed until it pops out from the front
panel so that the word “OFF” may be read at the top
of the switch.
NOTE: This switch is normally left in the “ON” position.
Headphone Jack:This jack may be used to
listen to the AVR 7300’s output through a pair of
headphones.Be certain that the headphones have a
standard 1/4" stereo phone plug, or that you use an
adapter,as needed,to convert the plug on your head-
phones to the 1/4" jack used on the AVR.When the
headphone jack is in use,the main room speakers will
automatically be turned off and the unit will output a
standard stereo signal.You may also use one of the
Dolby Headphone modes for an enhanced listening
experience.For more information on headphone lis-
tening, see page 35.
Tone Mode Button: This button controls the
tone mode settings,enabling adjustment of the bass
and treble boost/cut.You may also use it to take the
tone controls out of the signal path completely for
“flat”response.The first press of the button displays a
TONEMODEmessage in the Lower Display
Line $and in the on-screen display.To take the
controls out of the signal path,press either of the
‹/›Buttonsuntil the display reads TONE
OUT.To change the bass or treble settings,press
the button again until the desired option appears in the
Lower Display Line $and in the on-screen display
and then press either of the ‹/›Buttons to
enter the desired boost or cut setting. See page 35
for more information on the tone controls.
Speaker Selector Button: Press this button
to begin the process of configuring the AVR 7300 for
the type of speakers it is being used with.For com-
plete information on configuring the speaker settings,
see page 26.
Channel Adjust Selector:Press the button to
begin the process of adjusting the channel level out-
puts using the source currently playing through your
AVR. For complete information on adjusting the chan-
nel output level,see page 40.
Digital Input Selector: Press this button to
begin the process of selecting a digital source for
use with the currently selected input.Once the button
has been pressed,use the ‹/›Buttons
to choose the desired input and then press the
Set/Video Buttonto enter the setting into the
unit’s memory. See page 35 for more information on
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Harman Kardon AVR7300 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Harman Kardon AVR7300 in the language / languages: English as an attachment in your email.
The manual is 1,17 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
