Manual Harman Kardon AVR7300 (page 6 of 60) (English)

502638

Zoom out

Zoom in

1/60

FRONT-PANEL CONTROLS

6 FRONT-PANEL CONTROLS

1 Standby/On Button: When the Main Power

Switch is pressed in so that it is in the “ON”

position, press this button to turn on the AVR 7300.

When the unit is in the Standby mode, the switch is

surrounded by amber lighting. When the unit is on,

the lighting around the button is blue.

2 Surround Mode Group Selector: Press this but-

ton to select the top-level group of surround modes.

Each press of the button will select one of the sur-

round mode categories. Once the button is pressed so

that the name of the desired surround mode category

appears in the on-screen display and in the Lower

Display Line $, press the Surround Mode

Selector 3 to cycle through the individual modes

available. For example, press this button to select

Dolby modes, and then press the Surround Mode

Selector 3 to choose from the various mode

options.

3 Surround Mode Selector: Press this button

to select from among the available surround mode

options for the surround mode category selected.

The specific modes will vary based on the number of

speakers available, the surround mode category and

whether the input source is digital or analog. For

example, press the Surround Mode Group Selector

2 to select a category such as Dolby or Logic 7,

and then press this button to see the specific mode

choices that are available. For more information on

mode selection, see page 35.

4 Tuning Selector: Press the left side of the button

to tune lower-frequency stations and the right side of

the button to tune higher-frequency stations. When

the tuner is in the MANUAL/MONO mode,

each tap of the selector will increase or decrease the

frequency by one increment. When the tuner receives

a strong-enough signal for adequate reception,

MANUAL TUNED will appear in the Lower

Display Line $ and in the on-screen display. When

the tuner is in the AUTO/STEREO mode,

press the button once, and the tuner will scan for a

station with acceptable signal strength. When the next

higher- or lower-frequency station with a strong-

enough signal is tuned, the frequency scan will stop

and the Lower Display Line $ and the on-screen

display will indicate AUTO TUNED. When an FM

Stereo station is tuned, the display will read AUTO

ST TUNED. See page 39 for more information

on using the tuner.

5 Tuner Band Selector: Pressing this button will

switch to the Tuner mode. Pressing it again will switch

between the AM and FM frequency bands. (See page

39 for more information on the tuner.)

6 Preset Stations Selector: Press this button to

scroll up or down through the list of stations that have

been entered into the preset memory. (See page 39

for more information on tuner programming.)

7 Input Source Selector: Press this button to

change the input by scrolling up or down through the

list of input sources.

8 Tuner Mode Selector: Press this button to select

Auto or Manual tuning. When the button is pressed so

that AUTO/STEREO appears in the Upper

Display Line #, the tuner will search for the next

station with an acceptable signal when the Tuning

Selector 5w

is pressed. When the button

is pressed so that MANUAL/MONO appears

in the Upper Display Line #, each press of the

Tuning Selector 5w

will increase the fre-

quency

. (See page 39 for more information on using

the tuner.) This button may also be used to switch

between Stereo and Mono modes for FM radio recep-

tion. When weak reception is encountered, select the

MANUAL/MONO tuning mode. Press and hold

again to switch back to AUTO/STEREO

mode. (See page 39 for more information on using

the tuner.)

9 Front-Panel Control Door: To open the door so

that the front-panel jacks and controls behind this door

may be accessed, gently push the door down and

toward you, using either lower corner of the door.

) Volume Control: Turn this knob clockwise to

increase the volume, counterclockwise to decrease the

volume. If the AVR 7300 is muted, adjusting the vol-

ume control will automatically release the unit from the

silenced condition.

! Input Indicators: One of these indicators will light

to identify the currently selected input. Note that the

entire list will light briefly each time the unit is turned

on, as a test.

@ Speaker/Channel Input Indicators: These indi-

cators are multipurpose, indicating both the speaker

type selected for each channel and the number of

audio channels available. The speaker indicators light

as a single outline around the speaker position indica-

tor when a “small” speaker is selected and as a larger

icon with three connected boxes when “large” speak-

ers are selected. When only the speaker position let-

ters appear, no speaker has been assigned to that

position. (See page 26 for more information on con-

figuring speakers.) The letters inside each box also

indicate the active input channels. For standard analog

inputs, only the L and R will light, indicating a stereo

input. For a digital source, the indicators will light to

display the channels being received at the digital input.

When the letters flash, the digital input has been inter-

rupted and an UNLOCK message may appear in

the Lower Display Line $. (See page 38 for more

information on the Channel Indicators.)

# Upper Display Line: Depending on the unit’s

status, a variety of messages will appear here. In

normal operation, this line will show the current input

source and identify whether an analog or digital input

is in use. When the tuner is selected as the input, this

line will identify the station as AM or FM and show the

frequency and preset number, if any.

$ Lower Display Line: Depending on the unit’s

status, a variety of messages will appear here. In nor-

mal operation, the current surround mode will appear

on this line.

% Surround Mode Indicators: One of these

indicators will light to show the surround mode in

use. Depending on the specific combination of input

sources and surround mode selected, more than

one indicator may light. (See page 35 for more

information.)

^ Remote Sensor Window: The sensor behind

this window receives infrared signals from the remote

control. Aim the remote at this area and do not block

or cover it unless an external remote sensor is

installed.

AVR7300(120v)-OM 6/14/04 9:15 AM Page 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR7300 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR7300 Manual

Product: