502558
25
Zoom out
Zoom in
Previous page
1/68
Next page
SYSTEM CONFIGURATION 25
ENGLISH
System Configuration
To change the Component Video assignment,
first make certain that the cursor is pointing
to the
COMPONENT IN line on the menu
screen, and then press the
/
Navigation
Button
E
F until you see the desired input
in the highlighted video.
When the desired component input has been
selected, press the
¤
Navigation Button
E
F go to the next setting.
At the
VIDEO PROCESS line, you are able
to select whether video format conversion, is to
be used with the input source being configured.
If you do not need to change the setting, simply
press the
/
¤
Navigation Button
E
F to
move to the next line.
The
V-CONVERSION setting will not apply
any video enhancement or processing to the
incoming video signal, but it will output it in one
of the following ways, depending on the input
source.
A standard-definition (480i or 576i) analog
signal (composite, S-video or component) will
be converted so that it is available as an HDMI
signal at its input resolution, as well as at the
standard composite, S-video or component
analog video outputs. The signal will also be
available at the record outputs.
An analog component high-definition signal
will be digitized and output at its input
resolution through the HDMI outputs and as
an analog component signal, but not through
the analog composite or S-video monitor or
record outputs.
• HDMI input signals, regardless of their resolu-
tion, will be output through the HDMI outputs.
The
BYPASS setting will not apply any video
enhancement or processing to the incoming
video signal, but it will output it in one of the
following ways, depending on the input source.
Analog signals (composite, S-video or compo-
nent) will output only in the resolution and for-
mat that matches the input for both the main
“Monitor” connection as well as for the record
outputs.
• HDMI input signals, regardless of their resolu-
tion, will be output through the HDMI outputs.
When any needed change to the video
processing setting has been made, press the
/
¤
Navigation Button
E
F to move to
the next line.
At the
A/V SYNC DELAY line, you are able
to enter a setting that delays the audio output
slightly behind the video so that the loss of lip
sync that may occur due to digital video process-
ing in the transmission of a program, in the play-
back unit or in the display is corrected. This lack
of lip sync is not a fault of the sources; rather, it
is a by-product of video signal processing. In
most cases, we recommend that the delay adjust-
ment be made using the direct-access controls
on the remote so that you may more accurately
adjust the delay while viewing the on-screen
image, following the instructions shown on page
35, but you may also make it here using the
menu system. As the amount of delay needed
may vary from one source to another, we strongly
recommend that you adjust it for each input.
To adjust the A/V sync delay time from the
IN/OUT SETUP menu, make certain that
the cursor is pointing to the
A/V SYNC
DELAY
line, and then press the
/
Navigation Button
E
F until the desired
amount of delay is applied so that the on-screen
video matches the audio.
When all configuration adjustments on this menu
screen have been made, press the
/
¤
Navigation Button
E
F until the on-
screen cursor is pointing to
PAGE 2 and then
press the Set Button
F
Q to move to the
second screen of input/output settings. If all set-
tings for input configuration are complete, press
the
/
¤
Navigation Button
E
F until
the on-screen cursor is pointing to
MASTER
MENU
and then press the Set Button
F
Q
to return to the main menu screen.
The second page of the
IN/OUT SETUP
menu (Figure 9) allows you to further configure
the AVR 645 for special custom features.
Figure 9
An exclusive Harman Kardon feature is the ability
to switch front panel jacks from their normal use
as inputs to output connections so that portable
recording devices may easily be connected. The
front panel analog Video 4 Jacks
Ô
are nor-
mally set as an input for use with camcorders,
video games and other portable audio/video
products, but they may be switched to an output
for connection to portable audio/video recorders.
To temporarily switch them to outputs, select the
IN/OUT SETUP menu. Press the
¤
button
E
F until the on-screen cursor is pointing
to the
VIDEO 4 line. Press the
button
E
F so that the word OUT is highlighted.
Note that the Input/Output Status Indicator
(
between the S and Composite video jacks
will turn red, indicating that the analog Video 4
jacks
Ô
are now record outputs.
On the AVR, the Coaxial 4 Digital Jack
Ó
is
normally an input, but it may also be switched to a
digital output for use with CD-R/RW decks, MD re-
corders or other digital audio recorders. To change
the jack to an output, press the
/
¤
buttons
E
F while the IN/OUT SETUP menu is
on the screen so that the cursor is next to
COAXIAL 4. Then press the / buttons
E
F so that the word OUT is highlighted.
Note that the Digital Coax 4 Status Indicator
(
will turn red, indicating that the jack is now a
record output.
Note: A signal will be sent to this jack only
when the input selected for use by the AVR is
digital. Digital signals will be passed through
regardless of their format, and which digital
input (optical or coax) they are fed from.
However, analog signals are not converted to
digital, and the format of the signal (e.g., PCM,
Dolby Digital or DTS) may not be changed.
Selection of the jacks as an output will remain
effective as long as the AVR is on. However, once
the unit is turned off, the jack will revert to its
normal use as an input when the unit is turned on
again.
The
REC OUT line enables you to select what
the audio output is at the analog record outputs
for the input source being configured. Press the
/
Navigation Button
E
F to choose
one of the following if you wish to change the
default setting:
ANALOG selects an unprocessed pass-
through of an analog source and is the default
setting for most inputs.
DSP DOWNMIX selects a two-channel
downmix of a multichannel digital input.
* IN/OUT SETUP *
VIDEO 4 : IN OUT
COAXIAL 4 : IN OUT
REC OUT : ANALOG
HDMI LINK : ON OFF
MASTER MENU PAGE 1
29851_AVR645_ENG 30/10/06 9:46 Side 25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR645 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR645 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR645

Harman Kardon AVR645 User Manual - German - 68 pages

Harman Kardon AVR645 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info