Manual Harman Kardon AVR45 (page 21 of 47) (English)

502646

Zoom out

Zoom in

1/47

System Configuration

When LARGE is selected, a full-

range output will be sent to the

front left and right outputs, and

NO low-frequency signals will be

sent to the subwoofer output.

5. When you have completed your

selection for the front channel, press

the Set button i˜, and then

press the

⁄

buttons g on the

remote or the Selector buttons¸

on the front panel to change the dis-

play to CEN SPEAKER.

6. Press the Set button i˜again,

and use the

⁄

buttons g on

the remote, or the Selector buttons

¸ on the front panel, to select the

option that best describes your system

based on the speaker definitions

shown above.

When CEN SP SMALL is

selected, low-frequency center

channel sounds will be sent to the

subwoofer output only. Note that if

you choose this option and there is

no subwoofer connected, you will

not hear any low-frequency sounds

from the center channel speaker.

When CEN SP LARGE is

selected, a full-range output will be

sent to the center speaker output,

and NO center channel signal will

be sent to the subwoofer output.

When CEN SP NONE is selected,

no signals will be sent to the center

channel output. The receiver will

operate in a “phantom” center

channel mode and center channel

information will be sent to the left

and right front channel outputs.

7. When you have completed your

selection for the center channel, press

the Set button i˜, and then

press the

⁄

buttons g on the

remote or the Selector buttons¸

on the front panel to change the

display to SUR SPEAKER.

8. Press the Set button i˜again,

and then use the

⁄

buttons g

on the remote or the Selector

buttons¸ on the front panel to

select the option that best describes

your system based on the speaker

definitions shown above.

When SUR SP SMALL is

selected, low-frequency surround

channel sounds will be sent to the

subwoofer output only. Note that if

you choose this option and there is

no subwoofer connected, you will

not hear any low-frequency sounds

from the surround speaker.

When SUR SP LARGE is selected,

a full-range output will be sent to the

surround channel outputs, and NO

surround channel signals will be sent

to the subwoofer output.

When SUR SP NONE is selected,

surround sound information will be

split between the front left and front

right outputs. Note that for optimal

performance when no surround

speakers are in use, the Dolby 3

Stereo mode should be used instead

of Dolby Pro Logic.

9. When you have completed your

selection for the surround channel,

press the Set button i˜, and

then press the

⁄

buttons g on

the remote or the Selector buttons¸

on the front panel to change the display

to SW SPEAKER.

10. Press the Set button i˜, and

then press the

⁄

buttons g on

the remote or the Selector buttons¸

on the front panel to select the option

that best describes your system.

Select S-W SP ON if a subwoofer

is connected to your system.

Select S-W SP OFF if a subwoofer is

NOT connected to your system. Note

that when no subwoofer is selected,

low-frequency sounds below 100Hz

will be sent to the front left/right

speakers, provided that the selection

in step 4, above, has been set to

LARGE. Otherwise, no low-frequency

sounds will be heard. This option is

not available when the front, center or

surround speakers are set to SMALL.

AVR45 om (G).Eng,Fr 4/16/99 11:41 AM Page 18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR45 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR45 Manual

Product: