Manual Harman Kardon AVR355 (page 44 of 58) (English)

502548

Zoom out

Zoom in

1/58

Programming the Remote

ctivity Programming (Macros)

Activities enable you to easily repeat frequently

used combinations of commands with the press

of a single button on the AVR’s remote control.

Once programmed, an Activity will send out up to

19 different remote codes in a pre-determined

sequential order enabling you to automate the

process of turning on your system, changing

devices, or other common tasks. The AVR’s

remote can store up to eleven separate activity

command sequences, one that is associated with

the AVR Power On button

, and ten more

that are accessed by pressing the 0-9 Buttons

. To start programming an activity, press the

Activity button

and one of the 0-9 buttons

to be programmed or the AVR Power On

button

at the same time. Note that the latest

selected Device LED will light red.

2. Enter the steps for the activity sequence by

pressing the button for the actual command

step. Although the activity may contain up to 19

steps, each button press, including those used to

change devices, counts as a step. The Device

LED will blink once to confirm each button press

as you enter commands.

• Remember to press the appropriate Input

Selector button

before functions are

changed to another device. This is also needed

for the AVR Selector button

itself, as long

as it’s not lit red and AVR functions shall be

programmed.

3. When all the steps have been entered, press

the Activity button

again to enter the

commands. The red light under the Input

Selector

will blink three times and then

turn off.

Note: It can take up to 10 seconds to send out

19 commands from an Activity Button. Please

continue to point the remote control at the

device(s) until all the commands on the Activity

Button have been sent out. This will ensure that

all the commands are received by the device(s).

Example: Activity Button Programming.

To program Activity Button “2” to send the fol-

lowing commands: turn on the Audio receiver,

turn on the TV, turn on a DVD, and turn on a

Satellite receiver.

Press the Activity Button “2” and the ACTIVITY

button, simultaneously.

Press the AVR device button(to change to the

AVR mode)

Press the AVR POWER ON button(to turn on the

Audio receiver)

Press the TV device button(to change to the TV

mode)

Press the DEVICE POWER ON button(to turn on

the TV)

Press the DVD device button(to change to the

DVD mode)

Press the DEVICE POWER ON button(to turn on

the DVD)

Press the SAT device button(to change to the

SAT mode)

Press the DEVICE POWER ON button(to turn on

the SAT receiver)

10. Press the ACTIVITY button.

After following these steps, each time you press

the Activity Button

, followed by pressing

the "2" Button where the Activity is pro-

grammed,, the remote will send all Power On

commands.

The "2" Button only sends the programmed

Activity when the Activity Button

pressed first. Otherwise, Button "2" sends the

normal, numerical 2.

Erasing Activity Buttons

Press the Activity button

and the Activity

Button (0~9, or AVR POWER ON) that you wish

to program, simultaneously. The Device LED will

light up.

Press the Activity button

again. The Device

LED blinks three times.

Note: Any previously stored commands on an

Activity Button will be erased when new com-

mands are stored on the same Activity Button.

rogrammed Device Functions

Once the AVR’s remote has been programmed for

the codes of other devices, press the appropriate

Input Selector

to change the remote from

control over the AVR to the additional product.

When you press any of these buttons, it will briefly

flash in red to indicate that you have changed the

device being controlled.

When operating a device other than the AVR, the

controls may not correspond exactly to the func-

ion printed on the remote or button. Some com-

mands, such as the volume control, are the same

as they are with the AVR. Other buttons will

hange their function so that they correspond to

a secondary label on the remote. For example,

the Sleep and Surround mode selector buttons

also function as the Channel Up and Channel

Down buttons when operating most TV sets,

VCRs or Sat-Receivers.

For some products, however, the function of a

particular button does not follow the command

printed on the remote. In order to see which

function a button controls, consult the Function

List tables printed on page 46-50. To use those

tables, first check the type of device being

controlled (e.g., TV, VCR). Next, look at the

remote control illustration belonging to the

Function List. Note that each button has a num-

ber on it.

To find out what function a particular button has

for a specific device, find the button number on

the Function List and then look in the column for

the device you are controlling. Most of the but-

tons are fairly straightforward, as they perform

identical functions for all devices, but some have

other functions for some devices.

44 PROGRAMMING THE REMOTE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR355 in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR355

Harman Kardon AVR355 User Manual - German - 58 pages

Harman Kardon AVR355 User Manual - Dutch - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR355 Manual

Product: