502622
29
Zoom out
Zoom in
Previous page
1/76
Next page
29
INSTALLATION
To make analog audio recordings, connect the recorder’s left and right
analog audio outputs to the Analog 2 Audio Inputs on the AVR, and the
recorder’s analog audio inputs to the AVR’s Analog 2 Audio Outputs.
No video connection is required, although the AVR will display any signal
at the video input assigned to the same source as the Analog 2 Audio
Inputs. See Figure 29.
Figure 29 – Connecting an Audio Recorder
Connect an iPod Using Docking Station
The AVR 354 includes The Bridge II, a docking station compatible with
most docking iPod models, 4G and later (not included). Enjoy audio and
video content stored on the iPod, with all the power and fidelity of your
home theater system. With The Bridge II, navigation and control of the
iPod is a simple matter of using the preprogrammed AVR remote and
following the on-screen menus. The system even charges the iPod when
the AVR is powered on.
Simply plug the proprietary cable from The Bridge II into the special
The Bridge II connector on the rear of the AVR 354. See Figure 30.
Use the dock adapter supplied with the iPod, or obtain an adapter to
avoid damaging The Bridge II or the Apple iPod during use.
Figure 30 – The Bridge II Connector
NOTE: The original version of this accessory, known as
The Bridge, is not compatible with the AVR 354. Should you
misplace The Bridge II that is included with the AVR 354 in
the future, contact Harman Kardon and make sure to order
The Bridge II as a replacement.
Alternatively, or if you have another brand of portable audio player, use
an interconnect with a stereo 1/8-inch mini-plug at one end and two
RCA plugs at the other end to connect the player to the Audio Inputs
on the AVR’s front panel. See Figure 31.
Connecting a Game Console, Camera or Other Device
If a device will only be connected temporarily, you may use the audio/
video inputs on the front panel. When not in use, place the supplied
covers over the jacks for a cleaner appearance by snapping the covers
in place. To remove the covers, gently press on the left side of each
cover so that it pivots out.
Video Components: Install video components, e.g., game consoles
and camcorders, as follows (see Figure 31):
• Connect the component’s S-video or composite video output (use
only one connection) to the corresponding front-panel Input on the AVR.
• Connect the component’s optical or coaxial digital audio output to
either the Optical or Coaxial Input on the front panel (if available).
For fully analog devices, connect the device’s analog audio outputs
to the AVR’s front-panel Analog Audio Inputs.
Figure 31 – Connecting a Device to the Front-Panel Inputs
Audio Components: Connect audio-only devices, such as CD players,
to either the Coaxial or Optical Digital Audio Inputs, or the Analog Audio
Inputs (see Figure 31).
NOTE: If your video devices are equipped with HDMI or com-
ponent video outputs, you may connect them to any available
audio and video input on the AVR.
Step Five – Connect the Video Display
IMPORTANT NOTE: Do not connect any video output on the
video display (TV) to any video input on the AVR. Doing so will
cause undesirable video interference.
HDMI Video: If the display has an HDMI input, connect the HDMI
Monitor Output to the display (see Figure 32). Thanks to the AVR 354’s
sophisticated video processing and upscaling capabilities, no other video
connections are required from the AVR to the video display. Analog
video sources (composite, S-video and component) are converted to
the HDMI format and upscaled to as much as 1080p resolution,
depending on the display’s capabilities. Proceed to Step Six.
AVR 354
AVR 354
AVR 354
AVR354 OM.qxd 9/26/08 12:26 PM Page 29
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR354 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR354 in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info