A Upper Display Line
B Lower Display Line
C OSD Indicator
D Multiroom Indicator
E Speaker/Channel Input Indicators
F PRESET Indicator
G MEMORY Indicator
H STEREO Indicator
I TUNED Indicator
J AUTO Indicator
K 192kHz Indicator
L 96kHz Indicator
A Upper Display Line: Depending on the unit’s status,
a variety of messages will appear here. In normal opera-
tion, the current audio and video input source information
will appear on this line.
B Lower Display Line: Depending on the unit’s
status, a variety of messages will appear here. In nor-
mal operation, the current surround mode name will
appear on this line.
C OSD Indicator: When the OSD system is in use,
this indicator lights to remind you that the other indica-
tors in this display do not function when the On-
Screen Display is being used.
D Multiroom Indicator: This indicator lights when
the multiroom system is active. It will remain lit when
the multiroom system is in use even though the main
room system is in the Standby mode and all other
indicators are dark. (See page 34 for more informa-
tion on the Multiroom system.)
E Speaker/Channel Input Indicators: These indica-
tors are multipurpose, indicating either the speaker type
selected for each channel or the incoming data-signal
configuration. The left, center, right, right surround and
left surround speaker indicators are composed of three
boxes, while the subwoofer is a single box.The center
box lights when a “Small” speaker is selected, and the
two outer boxes light when “Large” speakers are selected.
When none of the boxes are lit for the center, surround
or
subwoofer channels, no speaker has been selected for
one of those positions. (See page 21 for more informa-
tion on speaker setup.) The letters inside each of the
center boxes display the active input channels. For stan-
dard analog inputs, only the L and R will light, indicating a
stereo input. When a digital source is playing, the indicators
will light to display the channels being received at the
digital input. When the letters flash, the digital input has
been interrupted. (See page 29 for more information on
the channel indicators.)
F PRESET Indicator: This indicator lights when the
tuner is in use to show that the present number for the
current station being listened to appears in the Upper
Display Line. (See page 30 for more information on
tuner presets.)
G MEMORY Indicator: This indicator flashes when
entering presets and other information into the tuner’s
memory.
H STEREO Indicator: This indicator lights when an
FM station is being tuned in stereo.
I
TUNED Indicator:
This indicator lights when a sta-
tion is being received with sufficient signal strength to
provide acceptable listening quality.
J AUTO Indicator: This indicator lights when the
tuner’s Auto mode is in use.
K 192kHz Indicator: This indicator lights when the
input source has a 192kHz bit rate.
L 96kHz Indicator: This indicator lights when the
input source has a 96kHz bit rate.
