8FRONT-PANEL INFORMATION DISPLAY
FRONT-PANEL INFORMATION DISPLAY
N Sleep Indicator: This indicator lights when the
Sleep function is in use. The numbers in the
Preset
Number/Sleep Timer
J will show the minutes
remaining before the AVR 225 goes into the Standby
mode. (See page 24 for more information on the Sleep
function.)
O
Memory Indicator: This indicator flashes when
entering presets and other information into the tuner’s
memory.
P Stereo Indicator: This indicator lights when an FM
station is being tuned in stereo. This indicator differs from
the indicator that lights when the surround decoding
modes are turned off, which is described above as the
Dolby 3 Stereo/Stereo Indicator E.
Q
Tuned Indicator:
This indicator lights when a station
is being received with sufficient signal strength to pro-
vide acceptable listening quality.
R Auto Indicator: This indicator lights when the
tuner’s Auto mode is in use.
S Main Information Display: This display shows
messages relating to the status, input source, surround
mode, tuner, volume level or other aspects of the
AVR 225’s operation.
T Analog Input Indicator: This indicator lights when
an analog input source has been selected.
U Coaxial Digital Input Indicators: These indicators
light to show when a coaxial digital audio input has
been selected.
V Optical Digital Input Indicators: These indicators
light to show when an optical digital audio input has
been selected.
NOTE: See page 26 for information on assigning either
an analog input or one of the digital audio inputs to the
source currently in use.