502641
9
Zoom out
Zoom in
Previous page
1/24
Next page
9


AVR 142/230
ENGLISH
Rear Panel Connections
REAR PANEL CONNECTIONS
Tape Inputs: Connect these jacks to the PLAY/
OUT jacks of an audio recorder.
Tape Outputs: Connect these jacks to the
RECORD/INPUT jacks of an audio recorder.
Video 1 Audio Inputs: Connect these jacks to
the PLAY/OUT audio jacks on a TV or other video
source.
AM Antenna: Connect the AM loop antenna
supplied with the receiver to these terminals. If an
external AM antenna is used, make connections to
the AM and GND terminals in accordance with the
instructions supplied with the antenna.
Video 1 Audio Outputs: Connect these jacks to
the RECORD/INPUT audio jacks on a VCR or any other
Audio recorder.
DVD Audio Inputs: Connect these jacks to the
analog audio jacks on a DVD or other video source.
FM Antenna: Connect the supplied indoor or an
optional external FM antenna to this terminal.
CD Inputs: Connect these jacks to the analog
output of a compact disc player or CD changer.
Video 1 Component Video Inputs: Connect
the Y/Pr/Pb component video outputs of an HDTV Set-
top convertor, satellite receiver, or other video source
device with component video outputs to these jacks.
Coaxial Digital Inputs: Connect the coax digital
output from a DVD player, HDTV receiver, LD player, MD
player or CD player to these jacks. The signal may be
either a Dolby Digital signal, DTS signal or a standard
PCM digital source.
Do not connect the RF digital output of an LD player to
these jacks.
Subwoofer Output: Connect this jack to the
line-level input of a powered subwoofer. If an external
subwoofer amplifier is used, connect this jack to the
subwoofer amplifier input.
Video Monitor Output: Connect these jacks to
the composite input of a TV monitor or video projector
to view the output of any video source selected by the
receiver’s video switcher.
HDMI Inputs: Connect the HDMI output of video
sources such as a DVD player, set-top box or HDTV
tuner to either of these three jacks.
HDMI Output: Connect this jack to the HDMI
input on a compatible HDMI-equipped video display.
Monitor Component Video Outputs: Connect
these outputs to the component video inputs of a
video projector or monitor. When a source connected
to one of the two Component Video Inputs

is selected the signal will be sent to these jacks.
Video 2 Component Video Inputs: Connect
the Y/Pr/Pb component video outputs of a DVD player
to these jacks.
Note: All component inputs/outputs can be used for
RGB signals too, in the same way as described for the
Y/Pr/Pb signals, then connected to the jacks with the
corresponding color.
RGB connection is not possible if the source outputs a
separate sync signal (see page 11).
AC Power Cord: Connect the AC plug to an
unswitched AC wall output.
DVD Video Inputs: Connect these jacks to the
composite output jacks on a DVD player or other video
source.
Video 1 Video Outputs: Connect these jacks to
the RECORD/INPUT composite jack on a VCR.
G
Video 2 Audio Inputs: Connect these jacks to the
PLAY/OUT audio jacks on a VCR or other video source.
Video 2 Video Inputs: Connect these jacks to the
PLAY/OUT composite jacks on a second VCR or other
video source.
Optical Digital Inputs: Connect the optical
digital output from a DVD player, HDTV receiver, LD
player, MD player or CD player to these jacks. The
signal may be either a Dolby Digital signal, a DTS
signal or a standard PCM digital source.
Video 1 Video Inputs: Connect these jacks to
the PLAY/OUT composite jacks on a TV or other video
source.
6-Channel Direct Inputs: These jacks are used
for connection to source devices such as DVD-Audio or
SACD players with discrete analog outputs.
Digital Audio Output: Connect this jack to the
matching digital input connector on a digital recorder.

Front/Center Speaker Outputs: Connect
these outputs to the matching + or – terminals on
your front/center speakers. When making speaker
connections, always make certain to maintain correct
polarity by connecting the red (+) terminals on the
AVR to the red (+) terminals on the speaker and
the black (–) terminals on the AVR to the black (–)
terminals on the speakers. (See page 12 for more
information on speaker polarity.)

Surround Speaker Outputs: Connect these
outputs to the matching + or – terminals on your left
and right surround speakers. When making speaker
connections always make certain to maintain correct
polarity by connecting the red (+) terminals on the
AVR to the red (+) terminals on the speakers and
the black (–) terminals on the AVR to the black (–)
terminals on the speakers. See page 12 for more
information on speaker polarity.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR142 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR142 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR142

Harman Kardon AVR142 User Manual - German - 24 pages

Harman Kardon AVR142 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info