Manual Harman Kardon AVR 4000 (page 33 of 58) (English)

8518

Zoom out

Zoom in

1/58

OPERATION 33

Operation

Tuner Operation

The AVR 4000’s tuner is capable of tuning AM,

FM and FM Stereo broadcast stations and receiv-

ing RDS data. Stations may be tuned manually, or

they may be stored as favorite station presets and

recalled from a 30 position memory.

Station Selection

1. Press the AM/FM Tuner Select button

on the remote to select the tuner as an input. The

tuner may be selected from the front panel by

either pressing the Input Source Selector

until the tuner is active or by pressing the Tuner

Band Selector

at any time.

2. Press the AM/FM Tuner Select button

or Tuner Band Selector

again to switch

between AM and FM so that the desired frequen-

cy band is selected.

3. Press the Tuner Mode button

on the

remote or hold the Band Selector

on the

front panel pressed for 3 seconds to select manu-

al or automatic tuning.

When the AUTO indicator

is illuminated in the

Main Information Display the tuner will only stop

at those stations that have a strong enough signal

to be received with acceptable quality.

When the AUTO indicator

is not illuminated,

the tuner is in a manual mode and will stop at

each frequency increment in the selected band.

4. To select stations press any Tuning button

. When the AUTO indicator

is illumin-

ated, press the button to cause the tuner to

search for the next highest or lowest frequency

station that has an acceptable signal or hold the

button pressed to tune more quickly and release

it to start the auto search. In the Auto mode the

tuner will play each station in stereo or mono

mode, just as the program is transmitted. If the

AUTO indicator

is not illuminated, tap the

Tuning button

to advance one frequen-

cy increment at a time, or press and hold it to

locate a specific station. When the TUNED indi-

cator

illuminates, the station is properly tuned

and should be heard with clarity.

5. Stations may also be tuned directly by pressing

the Direct button

, and then pressing the

Numeric Keys

that correspond to the sta-

tion’s frequency.The desired station will auto-

matically be tuned after the latest number is

entered. If you press an incorrect button while

entering a direct frequency, press the Clear but-

ton

to start over.

NOTE: When the FM reception of a stereo

station is weak, audio quality will be increased

by switching to Mono mode by pressing the

Tuner Mode button

on the remote or hold-

ing the Band Selector

on the front panel

pressed for 3 seconds until the STEREO

indicator

goes out.

Preset Tuning

Using the remote, up to 30 stations may be

stored in the AVR 4000’s memory for easy recall

using the front panel controls or the remote.

To enter a station into the memory, first tune the

station using the steps outlined above. Then:

1. Press the Memory button

on the remote.

Note that MEMORY indicator

will illumi-

nate and flash in the Main Information

Display

2. Within five seconds, press the Numeric Keys

corresponding to the location where you

wish to store this station’s frequency. Once

entered, the preset number will appear in the

Preset Number/Sleep Time Display

3. Repeat the process after tuning any additional

stations to be preset.

Recalling Preset Stations

• To manually select a station previously entered

in the preset memory, press the Numeric Keys

that correspond to the desired station’s

memory location.

• To manually tune through the list of stored pre-

set stations one by one, press the Preset

Stations Selector buttons

)

on the front

panel or remote.

i need circuit diagram for avr 4000 to repair the safety mood Submitted on 1-1-2023 at 14:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 4000 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 4000

Harman Kardon AVR 4000 User Manual - Dutch - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR 4000 Manual

Product: