Manual Harman Kardon AVR 4000 (page 32 of 58) (English)

8518

Zoom out

Zoom in

1/58

32 OPERATION

Operation

from a CD player may be recorded on a CD-R or

MiniDisc, but Dolby Digital or DTS signals may not.

• To make an analog recording of a Dolby Digital

or DTS source is not possible, if the source is con-

nected to a digital input of the AVR 4000 only.

But the analog two channel signal of that source

can be recorded (see item 5, ”Important Notes

on Digital Playback” above).

Output Level Trim Adjustment

Normal output level adjustment for the

AVR 4000 is established using the test tone, as

outlined on pages 24 and 25. In some cases,

however, it may be desirable to adjust the output

levels using program material such as a test disc,

or a selection you are familiar with. Additionally,

the output level for the subwoofer and those for

the Stereo and VMAx modes can only be adjust-

ed using this procedure.

To adjust the output levels using program materi-

al, first select the surround mode for which you

want to trim the speakers (see NOTE below), start

your program material source and set the refer-

ence volume for the front left and front right

channels using the Volume Control

Once the reference level has been set, press the

Channel Select button

and note that

FRONT L LEV will appear in the Main

Information Display

. To change the level,

first press the Set button

, and then use

the Selector buttons

or the

⁄

buttons

to raise or lower the level. DO NOT use the

volume control, as this will alter the reference

setting.

Once the change has been made, press the Set

button

and then press the Selector but-

tons

or the ⁄/¤ buttons

to select the

next output channel location that you wish to

adjust. To adjust the subwoofer level, press the

Selector buttons 5 or the

⁄/¤ buttons

until WOOFER LEV appears in the Main

Information Display

or on-screen display.

(only available if the subwoofer is turned on).

Press the Set button

when the name of

the desired channel appears in the Main

Information Display

and on-screen display,

and follow the instructions shown above to

adjust the level.

Repeat the procedure as needed until all chan-

nels requiring adjustment have been set. When

all adjustments have been made press the Set

button

twice, the AVR 4000 will return

to normal operation.

If you are using a disc with noise test signals or

an external signal generator as the source from

which to trim the output levels, you may use the

EzSet feature of the remote to guide you to the

correct SPL level. To use the remote for this pur-

pose, start the test tone from the source and

press and quickly release the SPL Indicator

Select

to activate the sensor. When the test

tone from the source is fed to the speaker you

want to trim, the Program Indicator

will

change color to indicate the level. Adjust the

level for the appropriate channel until the LED

lights green for all channels. When it is red the

level is too high; when it is amber the level is too

low. As the remote is used as sound pressure

level (SPL) sensor, in this case the channels can

be selected and their levels be adjusted, as

described above, with the Channel Select but-

ton

and the Selector

and Set buttons

on the AVR´s front panel only (with help of

an assisting person). After the output levels of all

channels are aligned,press the SPL Indicator

Select

to turn the sensor and indicator off.

The channel output may also be adjusted using

the full-OSD on-screen menu system. First, set

the volume to a comfortable listening level using

the Volume Control

. Then, press

the OSD button

to bring up the MAS-

TER MENU (Figure 1). Press the

¤ Button

until the on-screen › cursor is next to the

CHANNEL ADJUST line. Press the Set

Button

to activate the CHANNEL

ADJUST menu (Figure 8).

Figure 8

Once the menu appears on your video screen,

use the

⁄/¤ buttons

to move the on-screen

› cursor so that it is next to the channel that you

wish to adjust. Then, use the

‹/› buttons

to raise or lower the output level.

When all adjustments are done, press the

⁄/¤

buttons

to move the on-screen › cursor so

that it is next to RETURN TO MENU

and then press the Set Button

if you wish to

go back to the main menu to make other adjust-

ments. If you have no other adjustments to make,

press the OSD button

to exit the menu

system.

NOTE: The output levels may be separately

trimmed for each digital and analog surround

mode. If you wish to have different trim levels for a

specific mode, select that mode and then follow the

instructions in the steps shown above.

Changing the levels by the trim adjustment as

described above will automatically change the

level settings in the Output Adjust Menu (Fig. 7,

page 25) correspondingly (and vice versa). With

Stereo and Vmax modes the adjustment proce-

dure described above is the only way to trim the

output level (e.g. to match the Vmax level with

other modes).

6-Channel Direct Input

The AVR 4000 is equipped for future expansion

through the use of optional, external adapters for

formats that the AVR 4000 may not be capable

of processing.When an adapter is connected to

the 6-Channel Direct Input

, you may select

it by pressing the 6-Ch Direct Input Selector

. The 6-Channel Direct Input may also be

selected by pressing the Input Source Selector

button

on the front panel until the words

6 CHDIRECT appear in the Main

Information Display

, and a green LED

lights next to 6 CH in the Input Indicators



Note that when the 6-Channel Direct Input is in

use, you may not select a surround mode, as the

external decoder determines processing. In addi-

tion, there is no signal at the record outputs

when the 6-Channel Direct Input is in use, and

the Tone

and Balance

controls will

not be effective.

Memory Backup

This product is equipped with a memory backup

system that preserves tuner presets and system

configuration information if the unit is turned off

completely, accidentally unplugged or subjected

to a power outage. This memory will last for

approximately two weeks, after which time all

information must be reentered.

* CHANNEL ADJUST *

FRONT LEFT : 0dB

CENTER : 0dB

FRONT RIGHT : 0dB

SURR RIGHT : 0dB

SURR LEFT : 0dB

SUBWOOFER : 0dB

CHANNEL RESET: OFF ON

RETURN TO MENU

i need circuit diagram for avr 4000 to repair the safety mood Submitted on 1-1-2023 at 14:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 4000 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 4000

Harman Kardon AVR 4000 User Manual - Dutch - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR 4000 Manual

Product: