502541
27
Zoom out
Zoom in
Previous page
1/76
Next page
27
INSTALLATION
IMPORTANT NOTE FOR MICROSOFT
®
XBOX
®
360 USERS:
The Microsoft Xbox 360 gaming system is capable of outputting
high-definition 1080i and 1080p video signals using the analog
component video outputs. Since the AVR 347 is not capable of
converting these analog component video signals to the HDMI
format, although 1080i signals are passed through, as is, to
the Component Video Outputs, to view your Xbox 360’s video
output, connect the AVR’s or Xbox’s component video outputs
to your video display, or change your Xbox 360’s settings so
that it outputs 720p video, which the AVR 347 can then convert
to the HDMI format.
DVD
The DVD source is used for a DVD player. If you have a more advanced
multichannel device, such as a Blu-ray Disc or HD-DVD player, you may
connect it to the DVD source, or to one of the HDMI sources.
Referring to Table 2, connect your DVD player to the DVD Analog
Audio inputs
and to the Coaxial 1 Digital Audio input. If possible, use
the Component Video 1 inputs. Otherwise, connect the DVD players
S-video or composite video output to the matching DVD video input.
See Figure 24.
Figure 24 – DVD A/V, Digital Audio and Component Video Inputs
If your DVD player plays multichannel lossless discs, such as SACD or
DVD-Audio, or when an HD-DVD or Blu-ray Disc player is used, you
may also need to connect the 6- or 8-channel analog audio outputs on
the player to the 6-/8-channel analog audio inputs on the receiver, in
order to enjoy these discs to their fullest. See Figure 25.
Figure 25 – 6-/8-Channel Analog Audio Inputs
NOTE: The multichannel analog audio connection is not required
for DVD-Audio players compliant with HDMI version 1.1 or better,
or HD-DVD and Blu-ray Disc players that decode the digital audio
internally and output linear PCM signals in digital format. Consult
the owner’s guide for your disc player for more information.
HDMI 1 and 2
The HDMI sources are used with devices that are capable of outputting
digital, audio and video through an HDMI connection, such as an
HD-DVD or Blu-ray Disc player or HDTV tuner. The HDMI 1 and 2
sources are not used with any of the 2-channel analog audio or video
inputs on the AVR 347.
Make sure your video display is HDMI-capable, and for many source
devices, the display must be HDCP-compliant (High-Bandwidth Digital
Content Protection) in order to display copy-protected materials. If the
source device is not capable of outputting digital audio via its HDMI
output, connect its coaxial or optical digital audio output to an available
input on the AVR. If the source device plays multichannel discs (e.g.,
DVD-Audio, SACD, HD-DVD, Blu-ray Disc), connect its multichannel
analog audio outputs to the AVR 347’s 6-/8-Channel Inputs (but see
the note that follows Figure 25). Connect one of the source’s analog
video outputs to a source input on the AVR (e.g., Component Video 3
or Video 3) and select that source input, then select the 6-/8-Channel
Inputs for audio; the AVR 347 will retain the last video selection other
than HDMI. See Figure 26.
The AVR 347 is Simplay HD-verified for compatibility via the HDMI
connection with other Simplay HD-verified products.
If your video display is equipped with a DVI (Digital Video Interface)
input, you may use an HDMI-to-DVI adapter (not included).
Figure 26 – HDMI and Digital Audio Inputs
CD
The CD source is used for a strictly audio device, such as a CD player.
Referring to Table 2, connect your CD player to the CD Analog Audio
inputs
and to any available digital audio input. See Figure 27.
Figure 27 – CD Audio Inputs and Digital Audio Inputs
No video connections are needed.
Tape
The Tape source is used for audio-only recorders, such as a CDR,
MiniDisc or cassette deck.
Referring to Table 2, connect your recorder to the Tape Analog Audio
inputs and outputs, and to any available digital audio input (and corre-
sponding digital audio output). See Figure 28.
Figure 28 – Tape Audio Inputs and Outputs, and Digital Audio Inputs and Outputs
Remember to connect the
output
jacks on your recorder to the Tape
or digital audio
input
jacks on the AVR, and the
input
jacks on your
recorder to the Tape or digital audio
output
jacks on the AVR.
No video connections are needed.
With Harman Kardon’s optional The Bridge, you can listen to audio or
view videos stored on your iPod (not included), use your AVR 347
The
Bridge
TM
AVR347 om.qxd 7/10/07 11:01 AM Page 27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR 347 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 347 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 347

Harman Kardon AVR 347 User Manual - German - 64 pages

Harman Kardon AVR 347 User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info