502541
26
Zoom out
Zoom in
Previous page
1/76
Next page
26
26
INSTALLATION
NOTE: The AVR 347 is equipped with a total of eight digital
audio inputs, not including the HDMI inputs: six on the rear panel
(Coaxial 1, 2 and 3, Optical 1, 2 and 3) and two on the front
panel (Coaxial 4 and Optical 4). However, there are a total of nine
sources that may be connected to devices that have digital audio
outputs. We recommend certain digital audio connections simply
because, as reflected in Table A1 of the Appendix, those digital
audio inputs are assigned to those sources by default at the factory.
But any digital audio input (except HDMI) may be reassigned to
any source. Since you may not be using all nine source inputs,
you may reassign a digital audio input that is recommended for
a source you aren’t using to another device. Table 2 is a guide;
you may need to make adjustments to fit your system.
Video 1 Source
Since this source includes audio and video recording output jacks, it is
best suited to a video recorder, such as your VCR or DVR/PVR.
Referring to Table 2, connect your recorder to the Video 1 Analog Audio
inputs and outputs
and to any available coaxial or optical digital audio
input (and corresponding digital audio output). See Figure 20. Use either
the Video 1 S-video or composite video input and output if you wish to
make recordings. If you don’t plan on recording, you may use the
Component Video 2 inputs.
Figure 20 – Video 1 A/V Inputs and Outputs, and Digital Audio Inputs and Outputs
Remember to connect the audio and video
output
jacks on your
recorder to the Video 1 or digital audio
input
jacks on the AVR, and the
audio and video
input
jacks on your recorder to the Video 1 or digital
audio
output
jacks on the AVR.
NOTE: It isn’t possible to make recordings using component
video or HDMI connections. Keep this in mind as you connect
other source devices that you may wish to make recordings from.
Video 2 Source
The Video 2 source is used only for playback. The AVR 347 remote
control is programmed to operate many brands and models of cable
and satellite television devices, and we recommend connecting your
cable or satellite set-top box to this source.
Referring to Table 2, connect your set-top box to the Video 2 Analog
Audio inputs
and to the Optical 1 Digital Audio input. If possible, use
the Component Video 3 inputs. Otherwise, connect the set-top box’s
S-video or composite video output to the matching Video 2 video input.
See Figure 21.
Figure 21 – Video 2 A/V, Digital Audio and Component Video Inputs
Video 3 Source
The Video 3 source is used for playback only. The remote control is
programmed to operate a TV, but you may connect any audio/video
source device to the Video 3 inputs and use the device’s own remote
to control it.
If you receive your television programming using your TV with an antenna
or direct cable connection, connect the analog audio outputs (if available
on your TV) to the Video 3 Analog Audio inputs. See Figure 22.
Do not
connect any video output on the television set to any video input on the
receiver. See Step Five for information on connecting the receivers
video monitor outputs to the TV.
NOTE: You may connect any video source other than a display
device to the Video 3 S-video or composite video inputs.
Figure 22 – Video 3 A/V Inputs
Video 4 Source
The Video 4 source is used only for playback. It is also generally
reserved for components that are only temporarily connected to the
receiver, such as cameras and game consoles. When not in use, you
may place the supplied covers over the front-panel Video 4 jacks for
a cleaner appearance. Simply snap the covers in place. When you wish
to use the jacks, gently press on the left side of each cover to pivot
it out for removal.
Referring to Table 2, connect your camera or game console to the
Video 4 Analog Audio inputs
and to either the Coaxial 4 or Optical 4
digital audio input. Connect the component’s S-video or composite
video output to the matching Video 4 video input. See Figure 23.
Figure 23 – Video 4 A/V and Digital Audio Inputs
NOTE: The Video 4 Input Selector on the remote may be pro-
grammed to operate a television or video display only.
AVR347 om.qxd 7/10/07 11:01 AM Page 26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR 347 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 347 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 347

Harman Kardon AVR 347 User Manual - German - 64 pages

Harman Kardon AVR 347 User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info